695042

Inventum IWL6014GT Manual

28
Zoom out
Zoom in
Previous page
1/68
Next page
cleaining & maintenance
7
Switch the appliance off before cleaning and let it cool down. Do not clean the appliance with a pressure cleaner or steam cleaner.
Interior and the front
Clean the inside of the appliance and the front after every use. If this is not done, it might become impossible to remove and could
cause the surfaces to alter or discolour.
Use a damp cloth. If needed, use some washing-up liquid. Rinse well. Dry the inside with a dry cloth.
Warning! All surfaces are susceptible to scratching. Scratches on glass surfaces could even cause a breakage.
Contact with unsuitable cleaning agents can alter or discolour the surfaces.
To avoid damaging the surfaces of your appliance, do not use:
• cleaning agents containing soda, ammonia, acids or chlorides;
• cleaning agents containing descaling agents;
• abrasive cleaning agents, e.g. powder cleaners and cream cleaners;
• solvent-based cleaning agents;
• stainless steel cleaning agents;
• dishwasher cleaner;
• oven sprays;
• glass cleaning agents;
• hard, abrasive sponges and brushes, e.g. pot scourers;
• sharp metal scrapers.
Anti-slip mat
Remove the anti-slip mat from the drawer before cleaning it.
• Clean the anti-slip mat by hand only, using a solution of hot water and a little washing-up liquid, and then dry with a cloth.
Do not put the anti-slip mat back into the drawer until it is completely dry.
Do not wash the anti-slip mat in a dishwasher or washing machine.
Never place the anti-slip mat in the warming drawer to dry.
problems & solutions
8
With the help of the following guides, minor faults in the perfomance of the appliance, some of which may result from incorrect
operation, can be put right without contacting the customer service department.
Problem Possible cause Remedy
The appliance does not heat up. The appliance is not correctly plugged
in.
Remove the plug and properly plug it in again.
The mains fuse has tripped. Reset the trip switch in the mains fuse box. If, after
resetting the trip switch, the appliance will still not
heat up, contact the Inventum customer service.
The food is not hot enough. The function for keeping food warm
is not selected.
Select the correct function.
The temperature setting is too low. Select a higher temperature.
The vents are covered. Ensure that the air can circulate freely.
The food is too hot. The function for keeping food warm
is not selected.
Select the correct function.
The temperature is set too high. Select a lower temperature.
28 • English
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum IWL6014GT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum IWL6014GT in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info