616221
21
Zoom out
Zoom in
Previous page
1/30
Next page
English 21
programming automatic cooking
8
Set the duration of the cooking and set the end of the cooking time. The oven will automatically switch on and off.
Example: the current time is 12:30. The cooking time is 75 minutes. The food has to be done by 17.30. The oven starts cooking at 16:15
(17:30 minus 75 minutes) on the preset temperature and oven function and will finish at 17:30.
Press the central key CLOCK for about 3 seconds until the appears flashing in the display and press the central key CLOCK again
after which
A
U
T
O
dur
appears in the display.
Set the cooking time with the [+] and [-] keys. Hold the [+] or [-] key for setting the timer faster.
Wait a few seconds until the beep sounds. This confirms the setting of the cooking time. The display shows the clock.
Press the central key CLOCK again for about 3 seconds until the
appears flashing in the display and press the central key CLOCK
twice again after which
A
U
T
O
End
appears in the display.
Set the end of the cooking time with the [+] and [-] keys. Hold the [+] or [-] key for setting the timer faster.
Wait a few seconds until the beep sounds. This confirms the setting of the end of the cooking time. The display shows the clock.
Set the desired temperature and oven function. The oven will now automatically switch on and have the food ready on the set
endtime.
At the end of the cooking time a beep sounds. Press any key to stop the beep.
adjusting the beep volume
9
You can adjust the volume of the beep signal.
Press the keys [+] and [-] simultaneously, then press the central key CLOCK. The preset blinks in the display
ton1
.
Press the [-] key to select the desired volume.
-
ton1
: high volume
-
ton2
: medium volume
-
ton3
: low volume
Press the central key CLOCK to confirm the selected volume.
setting the end of the cooking time
7
The time which ends the functioning of the oven. The oven will function till the set end time on the preset temperature and oven
function.
Press the central key CLOCK for about 3 seconds until the appears flashing in the display and press the central key CLOCK twice
again after which
A
U
T
O
End
appears in the display. If the clock is set correctly, the display shows the current time.
Set the end of the cooking time with the [+] and [-] keys. Hold the [+] or [-] key for setting the timer faster.
Wait a few seconds until the beep sounds. This confirms the setting of the end of the cooking time. The display shows the clock.
When the end of the cooking time finishes, a beep sounds. The oven switches off. Press any key to stop the beep.
To adjust the end of the cooking time, press the central key CLOCK again until the flashes in the display and press the central key
CLOCK twice. Adjust the time with the [+] or [-] key.
To check the end of the cooking time, press the central key CLOCK thrice.
IOV6011-instructions.indd 21 15-12-2014 12:14:24
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum IOV6011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum IOV6011 in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info