790089

Inventum IMC3834GT Manual

35
Zoom out
Zoom in
Previous page
1/80
Next page
USING THE DEFROST PROGRAMS
Note:
• Only use frozen food stored at -18°C. Make sure that you freeze food in portions and as flat as
possible to fasten the defrosting process.
• Remove the packaging and weigh the defrosted food. You need to set the weight for the defrost
programs.
• Liquid can be produced during defrosting meat and poultry. Drain the liquid when you turn the food.
Make sure that the liquid does not come into contact with other food.
• Place the food on the glass baking tray or in a dish that is suitable for a microwave oven.
• After defrosting, leave the food to rest for 10 to 30 minutes to make sure that the complete dish has
the same temperature. Large pieces of meat require more time.
Defrosting by weight
1. Push the function button three times. The display shows '0.1 kg'.
2. Move the slider or push the up/down button to select the weight. The weight should be within 100 - 2000 grams.
3. Push the start button to start the appliance.
When the defrost program finishes, you will hear a sound signal and the appliance goes into standby.
Defrosting by time
1. Push the function button four times. The display shows '1:00'.
2. Move the slider or push the up/down button to set the time.
3. Push the start button to start the appliance.
When the defrost program finishes, you will hear a sound signal and the appliance goes into standby.
Note:
If half the defrosting time passed, a buzzer sounds two times. For a better defrosting result, you should
turn the food over. Close the door and push the start button again to continue the defrosting.
USING THE AUTOMATIC PROGRAMS
When using the automatic programs you only have to select a program and set the weight. The microwave power,
the time and the temperature are preset.
For an overview of the available automatic programs, refer to section
Auto menus
.
1. Push the auto menu button. The display shows the first automatic program number (A-1).
2. Push the auto menu button repeatedly to select an automatic program. The display shows the selected program,
the cooking time and the weight.
3. Move the slider or push the up/down button to select the weight.
4. Push the start button to start the appliance.
When the automatic program finishes, you will hear a sound signal and the appliance goes into the standby state.
Note:
• Once you selected an automatic program you cannot change it.
• You cannot change the cooking time.
• Some automatic programs use preheating. Note: Wait until the appliance is preheated, before placing
the food inside.
Note:
If you open the door of the appliance during cooking, you must touch the start/pause button to continue
the cooking.
PAUSING THE APPLIANCE
1. Push the cancel button to pause the program.
2. Push the start button again to start the appliance again.
English • 35
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum IMC3834GT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum IMC3834GT in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info