551592
22
Zoom out
Zoom in
Previous page
1/32
Next page
TIPS
High ambient temperatures have a negative effect on energy use. Keep the larder in a position away from direct sunlight or other
sources of heat.
Keep ventilation openings free. Clogged openings lead to higher use of energy.
Try not to open the door too often, especially when the weather is wet and hot. Once you open the door, mind to close it as soon as
possible.
The space between the shelves and the rear wall of the larder compartment must be unobstructed to allow the cool air to
circulate. Therefore don’t place any food items against the back.
Turn the thermostat to a lower setting when the circumstances allow it.
Before storing fresh cooked food, make sure the food has cooled at least to room temperature.
Ice and frost layer increase energy consumption, so clean the appliance as soon as the layer is 3 to 5 mm thick.
If the gasket is damaged or if it turns out that the sealing is poor, the energy consumption is substantially higher. To restore
efficiency, replace the gasket.
Keep the condensor on the rear wall always clean, free of dust or any impurities.
Always consider the instructions, otherwise the energyconsumption is substantially higher.
22 English
troubleshooting
7
If your appliance is not working properly, it may be a minor problem, therefore check the following:
Problem Cause Solution
Appliance is not functioning; light
does not work
- Appliance is not plugged in
- There is a power failure
- The thermostat is set on
- Plug the appliance in
- Check the fuse box
- Set the thermostat on setting 1-5
Temperature inside the larder is
too high or too low
Thermostat has been set
incorrectly
Set the thermostat correctly
Air circulation vents are blocked Clean the ventilation openings
Water is running out of the
larder
Drain outlet is blocked Clear the drain outlet with a skewer
Appliance is excessively noisy Has the appliance been installed
correctly?
Check the installation
Are the pipes at the back touch-
ing or vibrating?
Check it and move the appliance forwards
The inside light is not working Lamp is defective Replace the bulb following the instructions
Note: gurgling and hissing noises due to expansion in the refrigerant circuit are normal.
IKK1221S-1021S-0881S-instructions.indd 22 27-8-2014 9:42:21
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum IKK1221S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum IKK1221S in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Inventum IKK1221S

Inventum IKK1221S User Manual - English, German, Dutch, French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info