737416
37
Zoom out
Zoom in
Previous page
1/84
Next page
Power level Usage
0 Cooking zone is switched off.
1-2 Low simmer and slow heating.
3-4 Heating and quickly bringing to a simmer.
5-6 Medium cooking.
7-8 Cooking and roasting.
9/p Searing and stir-frying.
9
Troubleshooting
GENERAL TROUBLESHOOTING PROCEDURE
1. Try to find a solution for the problem with the help of the troubleshooting table and the breakdown codes.
2. If you cannot find a solution for the problem or the breakdown code keeps re-occuring, contact Inventum
Huishoudelijke Apparaten B.V.
TROUBLESHOOTING TABLE
Problem Possible cause Possible solution
The induction hob does not start. There is no mains supply.
Do a check if the mains plug is
correctly connected to the mains
socket.
Make sure that the mains supply
is on.
The child lock is activated. Deactivate the child lock. Refer to
section
'Activating and deactivating
the child lock'
.
The touch buttons are covered with
dirt.
Clean the appliance. Refer to section
'Daily cleaning'
.
The operation indicator on the
control panel of the induction hob
shows U.
There is no pan on the cooking zone. Put a pan on the cooking zone.
The pan is not suitable for an
induction appliance.
Use a pan that is suitable for an
induction appliance. Refer to section
'Requirements for pans'
.
A cooking zone switches off
automatically. The operation
indicator on the control panel of the
induction hob shows H.
The maximum cooking time is
reached.
1. Start the appliance. Refer to
section
'Starting the appliance'
.
2. Select a cooking zone. Refer to
section
'Using a cooking zone'
.
The touch buttons are covered. Remove the blockage.
There is an empty pan on a cooking
zone and the bottom is overheated.
Remove the pan from the cooking
zone.
The operation indicator on the
control panel of the induction hob
shows L.
The child lock is activated. Deactivate the child lock. Refer to
section
'Activating and deactivating
the child lock'
.
The display on the control panel of
the cooker hood shows G.
The grease filter is dirty.
1. Clean the grease filter. Refer to
section
'Cleaning the grease
collector and the grease filter'
.
2. Reset the alarm. Refer to section
'Resetting an alarm'
.
English37
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum IKI9045FLOW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum IKI9045FLOW in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Inventum IKI9045FLOW

Inventum IKI9045FLOW Installation Guide - English, German, Dutch, French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info