737416
32
Zoom out
Zoom in
Previous page
1/84
Next page
Starting the bridge mode
1. Make sure that the appliance is on.
2. Touch the two left selection/timer buttons simultaneously to connect the cooking zones. The operation indicator
shows n for the front cooking zone and 0 for the rear cooking zone.
3. Use the up button and the down button to select the power level. The operation indicator shows the set power
level.
Stopping the bridge mode
1. Touch the two left selection/timer buttons simultaneously to disconnect the cooking zones. The operation
indicator shows H or 0.
ACTIVATING AND DEACTIVATING THE CHILD LOCK
When the child lock is activated, you cannot operate the touch buttons.
Note:
If you do not finish the steps within 9 seconds, you have to switch off the appliance and start again.
Activating the child lock
1. Make sure that the appliance is on.
2. Touch the down button and the front right selection/timer button simultaneously.
3. Touch the front right selection/timer button again. The operation indicator shows L when the appliance is locked.
Unlocking the appliance
1. Make sure that the appliance is on.
2. Touch the down button and the front right selection/timer button simultaneously.
3. Touch the down button again. The operation indicator stops showing L when the appliance is unlocked.
USING THE COOKING TIMER
Note:
You can use the timer with different settings simultaneously for more than one cooking zone.
Note:
When the timer finishes, the timer display blinks 00 and you hear a sound signal. Touch any key to stop
the sound signal.
Note:
The cooking zone will automatically switch off when the timer is finished.
Starting the cooking timer
1. Select a cooking zone.
2. Use the up button or the down button to set the power level.
3. Touch the up button and the down button simultaneously to start the cooking timer. The timer display shows 00.
4. Use the up button to increase the time. The timer display shows the set time.
5. Use the down button to decrease the time. The timer display shows the set time.
6. When the cooking timer is set, the timer indicator stops blinking.
7. Repeat the procedure for another cooking zone.
Stopping the cooking timer
1. Select a cooking zone.
2. Touch the up button and the down button simultaneously. The timer display shows the remaining time.
3. Use the down button to stop the cooking timer. The timer display briefly shows 00 before it goes off.
4. Repeat this procedure for another cooking zone.
32
English
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum IKI9045FLOW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum IKI9045FLOW in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Inventum IKI9045FLOW

Inventum IKI9045FLOW Installation Guide - English, German, Dutch, French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info