790075

Inventum IKI9035 Manual

31
Zoom out
Zoom in
Previous page
1/72
Next page
breakdowns & solutions
8
If there is a problem, this is shown on the displays.
Breakdown code Cause Solution
E1/E2 The voltage is too high or too low. Have your connection checked by an electrician.
E3/E4 The temperature of the glass plate sensor
is too high.
Allow the glass plate to cool down and then switch on the induction
hob again.
E5/E6 The induction hob has overheated. Switch off the induction hob and allow the cooking zones to cool down.
F3/F4/F5/F6/F7/F8 The temperature sensor is defective. Contact the Inventum service department.
F9/FA/FC/FD IGBT sensor is defective. Contact the Inventum service department.
Breakdown (code) Cause What to do
The induction hob does not
do anything when the plug
isinserted in the socket.
No power supply. Check that the plug is properly inserted in the socket
andthat there is power on the socket.
The display switches on,
butthe induction hob
doesnotheat up.
The induction hob is too hot. The ambient temperature can be too high.
Check if theairopenings are blocked.
The induction hob stops
all ofa sudden during use
andthedisplay shows .
An unsuitable pan is being used. Use a pan suitable for induction with the correct diameter
(minimum Ø 12, 14 or 16 cm, depending on the cooking zone
Ø 16, 18 or 21 cm).
The diameter of the pan used
istoo small.
A cooking zone switches off
automatically and the display
shows [ H ].
The maximum cooking time
hasbeen reached. Switch on the cooking zone again.
The glass plate is cracked. Hazard! Switch off the power supply and
remove the plug of the appliance. Contact the
Inventum service department.
English • 31
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum IKI9035 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum IKI9035 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info