790075
23
Zoom out
Zoom in
Previous page
1/72
Next page
Before using the appliance for the first time, proceed as follows: carefully unpack the induction hob and remove
allpackaging material. Keep the packaging (plastic bags and cardboard) out of the reach of children. After unpacking
theappliance, check it for external damage that may have occurred during transport. Clean the glass plate with a slightly
damp cloth. Check that the voltage corresponds with what is stated on the information plate. For installing the induction
hob, observe the instructions in the following section.
prior to first use
3
English 23
installation instruction
4
Safety during use is only guaranteed if the assembly has taken place in a technically correct way and in accordance with
these installation instructions. The installer is liable for damage caused by incorrect assembly.
The electrical connection may be carried out only by a qualified electrician. This person should be aware of the national
and regional safety instructions with which the connection has to comply.
The hob falls under protective class I and may only be used in combination with an earthed connection. The manufacturer
is not liable for unsuitable operation and possible damage caused by unsuitable electric installations.
The hob must be connected to a permanent installation in which provisions for switching off are integrated,
inaccordance with the installation instructions.
Induction hobs may only be installed above a drawer, an oven with forced ventilation or dishwasher, and always with
a minimum distance for ventilation. Under the induction hob, no refrigerators, ovens without ventilation or washing
machines should be installed.
Make sure that the power supply cable does not get jammed during installation or is running along sharp edges.
Ifanovenis installed below it, make sure the cable runs via the rear corners of the oven to the connection box.
Itmustbeplaced in such a way that no contact is made with hot parts of the hob or oven.
The connection point, socket and/or plug must always be accessible.
The worktop on which the hob is placed must be flat, horizontal and stable. Observe the instructions from
themanufacturer of the worktop.
In case of incorrect installation or connection, the warranty becomes invalid.
• Attention: any change to the appliance, including replacement of the power supply cable, must be performed
byacertified installer.
SPACE AROUND THE HOB
Safe use requires sufficient space around the induction hob. Check that this space is available.
750
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum IKI9035 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum IKI9035 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 8.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info