695026

Inventum IKI6033 Manual

27
Zoom out
Zoom in
Previous page
1/76
Next page
cookware for induction
6
Cookware which has been used on other hobs, such as a gas hob, are no longer suitable for use on an induction hob.
Therefore purchase before the first use new cookware if you do not have suitable pans.
• Use thick, flat smooth bottomed cookware that are the same diameter as the cooking zone. This will help reduce cooking times.
• Cookware made of steel, enamelled steel, cast iron and stainless steel will give the best results.
• Check the indications of the manufacturer whether the pan is suitable for use on an induction hob.
• Cookware made of enamelled steel or aluminium or copper bottoms can cause a metallic residue to remain on the hob. If left,
this becomes difficult to remove. Clean the hob after every use.
• Cookware is suitable for induction when a magnet sticks to the bottom of the cookware.
• Cookware must be placed centrally on the cooking zone.
• When using certain pans, you may get various noises from the pans, this is due to the design of the pans and does not effect
the performance or safety of the hob.
ENERGY SAVING
• Induction cooking zones adapt automatically to the size of the cookware bottom up to a certain limit. However the magnetic
part of the cookware bottom must have a minimum diameter depending upon the size of the cooking zone.
• Place the cookware on the cooking zone before it is switched on. If it is switched on before placing any cookware, the cooking
zone will not operate.
• Always use a lid to reduce cooking time.
• Decrease the heat setting when a liquid comes to the boil.
• Minimise the amount of liquid or fat to reduce cooking times.
• Select the correct heat setting for the several cooking options.
The following table is an indication for the several cooking options.
Settings Use for:
0 cooking zone off
1 - 3 keep warm
4 - 5 gentle simmering, slow warming
6 - 7 reheating and rapid simmering
8 boiling, saute and searing
9 maximum heat
P Boost function
correct false false
cleaning & maintenance
7
Make sure all the cooking zones are cooled down before cleaning the hob and lock the hob with the child lock.
• Do not use abrasive pads, corrosive cleaners, aerosol cleaners or sharp objects to clean the surface of the hob which
are not intended for this purpose.
• Clean the surface daily with a damp cloth and a mild detergent, such as washing-up liquid. Dry thoroughly with kitchen paper or
a clean cloth.
• Spilt food can be removed by soaking the spot with a damp cloth and some washing-up liquid or a special scraper. Attention:
the glass scraper has a razor, therefore, it must be kept away from children.
• Use a special cleaner for ceramic/induction hobs for difficult stains. Attention: follow the instructions on the product.
English • 27
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum IKI6033 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum IKI6033 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info