54900
14
Zoom out
Zoom in
Previous page
1/20
Next page
medication or alcohol).
• This appliance may not be used by children unless the
switch has been preset by a parent or a supervisory
person, or the child has been sufciently instructed in
how to use this foot warmer safely.
• Caution! Never fall asleep while the foot warmer is
switched on.
• Do not use the foot warmer in bed.
• Never switch the foot warmer on when folded or
compressed, wedged between objects and never make
any sharp creases.
• This foot warmer is not intended for use in hospitals.
• Never use the appliance if it is not working properly,
or if it has been damaged. Any intervention other than
cleaning and normal maintenance by the customer
must be carried out by an approved service centre.
• If the appliance is used for other purposes than
intended, or is it not handled in accordance with the
instruction manual, the full responsibility for any
consequences will rest with the user. Any damages to
the product or other things are not covered by the
warranty.
This foot warmer is intended for warming human feet.
Do not use the foot warmer while wearing shoes, as this
will decrease your sensitivity to heat and soil the foot
warmer. This foot warmer is not intended for use in
hospitals or for commercial applications. In particular,
it may not be used on infants, small children, persons
insensitive to heat, helpless persons or animals.
Before you use the appliance for the rst time, please do
as follows: carefully unpack the appliance and remove
all the packaging material. Keep the material (plastic
bags and cardboard) out of reach of children. Check the
appliance after unpacking for any damage, possible from
transportation. Never switch the foot warmer on when
folded or compressed, wedged between objects and
never make any sharp creases. When used for the rst
time, the foot warmer may start to smell of plastic but
this will soon go away.
This foot warmer has a SAFETY SYSTEM. This electronic
sensor technology prevents the entire surface of the
foot warmer from overheating by automatically switching
off in the event of a fault. If the safety system switches
off the foot warmer automatically as a result of a fault,
the indicator lamp is no longer illuminated even when
the foot warmer is switched on. Please note that, after a
fault has occurred, the foot warmer can no longer be
used for safety reasons and must be sent to the service
address indicated.
The footwarmer heats up most quickly when you initially
set the highest temperature level (level 3). It can then
be turned down again as required.
Of course, the footwarmer can always also be used
while switched off, because its ‘teddy-bear’ plush will
warm the user’s feet even if there is no electrical outlet
nearby. We recommend switching on the footwarmer
approximately 15 minutes before use to achieve an
optimum effect.
Temperature settings:
O = Off
1 = Minimum heat
2 = Medium heat
3 = Maximum heat
This foot warmer has an automatic switch
off function which stops the heat supply
approx. 90 minutes after switching on the
foot warmer. The illuminated function
display then starts to ash. To operate the
foot warmer again, you must rst set the switch to zero.
After about 5 seconds, it can be switched on again.
If the foot warmer is no longer used after the timed
switch-off, it should be switched off (setting
“0”) or else unplugged from the mains.
Before cleaning the foot warmer, always unplug it from
the mains.
The footwarmer should be kept clean, as it may not be
washed.
Smaller stains can be removed with a cloth or damp
sponge, and if necessary, some liquid detergent for
delicate fabrics. The footwarmer may not be saturated
in the process. Please note that the footwarmer may not
be dried by machine, spun or dried, dry-cleaned, wrung
out, pressed or ironed. The removable ‘teddy-bear’ plush
can be washed by hand. Do not use the footwarmer again
until it is completely dry.
Do not use any cleaning agents containing solvents on
the appliance.
Storage
If you are not going to use the foot warmer for some
time, we recommend storing it in its original packaging
in a dry place without weighing it down. Let the foot
warmer cool down before storing.
5 | USE
14
2 | INTRODUCTION
4 | SAFETY SYSTEM
3 | BEFORE FIRST USE
6 | AUTOMATIC SWITCH OFF
7 | CLEANING & MAINTENANCE
02HZ30_GA_0410.indd 14 17-6-2010 9:57:51
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum HZ30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum HZ30 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Inventum HZ30

Inventum HZ30 User Manual - German, Dutch, French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info