694940

Inventum HWD722 Manual

12
Zoom out
Zoom in
Previous page
1/28
Next page
cleaning and maintenance
5
We recommend cleaning the hot water dispenser regularly, e.g. once per month. This is not only beneficial for the life span of the
appliance, but also ensures optimum use and, of course, nice water.
Prior to cleaning, always remove the plug from the wall socket and allow the appliance to cool down.
CLEANING
Regularly wipe the outside with a moist cloth. Never use detergents or abrasive cleaning agents!
Clean separate components such as the water reservoir, drip tray and cup grille with warm water and a mild washing-up liquid.
Dry these components thoroughly.
After cleaning the hot water dispenser, also remove any excess water via the water drain at the bottom.
Unscrew the rubber cap [11] of the water drain at the bottom of the appliance and allow the excess water
to run out of the appliance above the sink.
Properly re-tighten the rubber cap.
Attach the separate components and the appliance will be ready for use again.
REPLACING THE ANTI
-
SCALE FILTER
After every 150 litres of water, the anti-scale filter must be replaced. In case of moderate use, this will be approximately 3 times per
year. A new anti-scale filter is available via the Inventum webshop.
Open the lid [a] of the water reservoir [b] and remove the filter bucket [c] with the filter [d]. Remove the filter [d] from the filter
bucket and place a new filter. The old anti-scale filter can be disposed of. Place the filter bucket back in the water reservoir.
using the appliance
4
Check that the voltage stated on the information plate matches the voltage used in your region.
Place the appliance on a heat-resistant, flat surface. Insert the plug in an earthed wall socket.
FILLING THE HOT WATER DISPENSER
1. Open the lid of the water reservoir.
2. Lift the water reservoir from the appliance and use a measuring cup or bottle to fill the water reservoir.
3. Fill the water reservoir with maximum 2.2 litres of cold water.
4. Place the water reservoir back on the appliance and close the lid.
TAKING HOT WATER
1. Place a glass or cup under the water outlet on the cup grille.
2. Turn the temperature knob to the required temperature.
3. Press the on/off button once.
4. The hot water flows from the water outlet.
5. Press the on/off button once more to stop the water flow.
6. When filling several glasses, repeat the above steps.
Caution: the water and steam are hot and could cause burns in case of contact with your skin.
aa n
ui t
85 C
10 0 C
65 C
50 C
35 C
a
b
c
d
11
12 • English
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum HWD722 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum HWD722 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info