616168

Inventum HS422CG Manual

11
Zoom out
Zoom in
Previous page
1/24
Next page
English • 11
cleaning & maintenance
6
Always unplug the appliance before cleaning. Leave the
appliance to cool down completely.
Any deposits or starch residue left on the plate can be removed
using a damp cloth or an unabrasive liquid detergent.
Avoid scratching the plate with steel wool or metallic objects.
The plastic parts can be cleaned with a damp cloth then wiped
over with a dry cloth.
Never use any abrasives!
Never immerse the appliance into water or other liquids.
Press the shot-steam button to generate a
powerful burst of steam that can penetrate
the fabrics and smooth the most difficult
and tough creases. Wait a few seconds
before pressing it again.
By pressing the shot-steam button at
intervals you can also iron vertically such
as curtains or hung garments. Do not iron
clothes whilest wearing them! Don’t
direct the steam towards peoples or
animals!
Warning: the shot-steam function can only be used at high
temperatures. Stop the emission when the control light comes
on, than start ironing again only after the light has gone off.
shot-steam and ironing vertically
Make sure that there is water in the
reservoir. Press the spray button slowly for
a dense spray or quickly for a vaporized
spray.
Warning: for delicate fabrics, we
recommend moistening the fabric
beforehand using the spray function, or
putting a damp cloth between the iron
and the fabric. To avoid stainig, do not use the spray on silk or
synthetic fabrics.
To iron without steam, follow the instruction in section 4 STEAM
IRONING, leaving the steam selector on position
.
dry ironing
5
spray function
The self-cleaning feature cleans inside the plate, removing
impurities. We recommend using it every 10-15 days.
• Fill the reservoir up to the maximum level indicated and set
the steam selector to .
• Set the temperature knob to MAX and wait for the light to
turn off.
• Pull the plug out of the socket and hold the iron horizontally
over the sink.
• Hold the self clean button until all the boiling water, steam,
impurities come out.
• When the soleplate has cooled down, you can clean it with a
damp cloth.
self-cleaning
Disconnect the plug of the iron from the socket. Empty the
reservoir by turning the iron upside down and gently shaking it.
Leave the iron to cool down completely and roll up the power
cord with the rewinder. Always put the iron away in a vertical
postion.
storing
anti-calc system
A special filter inside the water reservoir softens the water and
prevents scale build-up in the plate. The filter is permanent and
can not be replaced. Please note: use tap water only.
anti-drip system
With the anti-drip system, you can perfectly iron even the most
delicate fabrics on low temperatures. The anti-drip system
automatically activates to prevent vaporization without risk of
spoiling or staining them.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum HS422CG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum HS422CG in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info