616168

Inventum HS422CG Manual

10
Zoom out
Zoom in
Previous page
1/24
Next page
Before you use the appliance for the first time, please do
as follows: Unpack the appliance carefully and remove all
the packaging material. Keep the material (plastic bags and
cardboard) out of reach of children.
Check the appliance after unpacking for any visible damage, that
could be caused by transportation. Do not use the appliance if
there are visible signs of damage.
When using the iron for the first time, you may notice a slight
emission of smoke and hear some sounds made by the
expanding plastics. This is quite normal and it stops after a short
time.
appliance description
2
before the first use
3
steam ironing
4
10 • English
Sort the laundry to be ironed according to the international
symbols on the garment label, or if this is missing, according to
the type of fabric.
Garment
label
Type of fabric Temperature setting
synthetic
•
low temperature
silk - wool
••
medium temperature
coton - linen
•••
high temperature
do not iron
Start ironing the garments requiring a low temperature.
This reduces the waiting times (the iron takes less time to heat
up than to cool down) and eliminates the risk of scorching the
fabric.
Check that the plug is disconnected from
the socket.
Move the steam selector to
.
Open the lid and slowly pour the water into
the reservoir using the special measure
cup. Take care not to go over the maximum
level (about 260 ml) indicated by MAX on
the reservoir.
Close the lid.
filling the reservoir
selecting the temperature
Put the iron in a vertical position and put the plug in the socket.
Adjust the temperature knob according to the international
symbol on the garment label.
The control light indicates that the iron is heating up. Wait until
the control light goes off before ironing.
Warning: during ironing, the control light comes on at intervals,
indicating that the selected temperature is maintained. If
you lower the thermostat temperature after ironing at a high
temperature, do not start ironing until the control light comes
on again.
selecting the quantity of steam
The quantity of steam is regulated by the steam selector.
Move the steam selector to a position between minimum and
maximum depending on the quantity of steam required and the
temperature selected.
Warning: the iron gives off steam continuously only if you hold
the iron horizontally. You can stop the continuous steam by
placing the iron in a vertical position or by moving the steam
selector to .
As indicated on the thermostat knob and in the initial table, you
can only use steam at the highest temperatures. If the selected
temperature is too low, water may drip from the plate.
1. Lid
2. Steam selector
3. Shot steam button
4. Spray button
5. Handle
6. Control light
7. Temperature
8. Water reservoir
9. Self clean button
10. Plate
Cup
2
3 6 5
1
8
10
7
9
4
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum HS422CG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum HS422CG in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info