Manual Inventum HK100B (page 14 of 20) (English, German, Dutch, French)

54741

Zoom out

Zoom in

1/20

Before you use the coffeemaker for the rst time,

please do as follows: Carefully unpack the appliance and

remove all the packagingmaterial. Keep the material

(plastic bags and cardboard) out of reach of children.

Check after unpacking the appliance for any damage,

possible from transportation. Put the appliance on a

cool, at and stable surface. Before rst use, rinse the

appliance once or twice with water (but without coffee).

Rinse the glass jug with warm water and make it dry.

Never use any abrasives! Important: Fill the appliance

only with cold water. Hot water has a negative effect on

the lifetime of the coffeemachine.

Before plugging into a socket, check that the voltage in

your home corresponds with the voltage printed on the

bottom of the appliance. Put the appliance on a cool,

at and stable surface. Connect the appliance to an

earthed socket. You can adjust the length of the cord by

pulling it out from, or pushing it into, the interior of the

appliance.

Because of the hinged lids of the lterholder and the

waterreservoir the appliance is real easy to use.

To ll the waterreservoir or place a paper lter just lift

the lid. By lifting the lterholder it is unlocked and can

be removed. When you want to place the lterholder

back, make sure that you put it correctly on the bracket.

1. Open the lid of the waterreservoir and ll it with

the desired amount of cold, fresh water (the level

indications apply to the amount of cups).

2. Open the lid of the lterholder and place a paper

lter (size 1 x 4) of which you have folded the sealed

edges. This prevents the paper lter to collapse.

For 10 cups, use 5 or 6 spoons of ground coffee.

3. Close the lid of the lterholder.

4. Place the jug on the warming plate.

5. Switch the coffeemaker on with the switch on the side

of the appliance.

The pilotlamp will now light up. The warmingplate

under the jug will get warm automatically.

6. The water will slowly be brought to the boil and will

run through the lter. You can follow this process

through the glass tube in the waterreservoir.

This appliance heats the water with the

boilerprinciple. The water will be brought up to the

boil with short periods of time and run through the

coffee in the lter.

7. As soon as the brewing proces has ended and the

waterreservoir is empty, you can serve the coffee.

Let the lter stay in the holder until it has cooled

down. The specially designed blendingtube in the

lid of the jug ensure the same taste of coffee in the

whole jug.

2 | BEFORE FIRST USE

8. Coffee tastes best immediately after brewing, don't

wait to long with serving the coffee. This way you

can enjoy your cup of coffee to the fullest. Place the

glass jug directly after serving the coffee back on the

warming plate or pour the leftover coffee in a thermos

jug.

Attention: This appliance is tted with an anti-drip

system. This allows you to remove the coffee jug so

that you can pour yourself a cup of coffee while it is still

brewing. Quickly replace the coffee jug to prevent the

lter holder from overowing. To keep the coffee hot,

replace the glass jug on to the warming plate. It will stay

hot for as long as the coffeemaker is switched on.

Always switch off the appliance after use. Don't forget

to throw away the paper coffeelter. Open the lid of

the lter and remove the lterholder. When you use a

permanent lter, empty this, rinse it and you can use it

again.

This appliance has an automatic switch-off which turns

the appliance of after approx. 2 hours if the appliance

was not switched off with the on-/ off switch.

3 | BREWING COFFEE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Inventum HK100B in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Inventum HK100B Manual

Product: