Manual Inventum FS50 (page 14 of 20) (English, German, Dutch, French)

54651

Zoom out

Zoom in

1/20

This device is intended only for use on the human face.

Using the facial sauna provides an ideal basis for cosmetic

facial care. The skin of your face is prepared optimally for

further treatments such as deep cleansing, moisturising,

face masks, etc.

Beauty salons very often begin facial treatments with a

steam treatment. The invigorating steam increases the

skin circulation, the pores are opened and impurities are

removed more easily.

You can thus provide the perfect basis for every kind of

facial care. The skincare products penetrate deep into

the skin through the opened pores, thus optimising their

action.

Before you use the appliance for the rst time, please do

as follows: Carefully unpack the appliance and remove

all the packaging material. Keep the material (plastic

bags and cardboard) out of reach of children. Check the

appliance after unpacking for any damage, possible from

transportation.

Place the device on a at, rm, level and water-sensitive

surface or on a table.

Use the measuring cup to ll the device’s water container

with water. Do not exceed the maximum lling level.

You should never ll the container directly under running

water but only use the measuring cup that comes with it.

The water volume at the maximum lling level is enough

for about 20 minutes use.

Do not use oils, herbs or other aromatic substances as a

substitute for water but only added to adequate water

lling.

As well as the facial mask, there is also a special

attachment for the nose.

Fix the desired steam mask onto the basic unit by turning

it.

Ensure that the mask engages rmly with the knobs.

Uncoil the cable fully. Plug into the socket. Then turn the

switch clockwise until the red indicator lights up. Turn

the switch rst to position 2 in order to speed up heating.

After about 5 minutes, steam begins to rise. Turn the

switch back to position 1 to reduce the steam output.

Adjustable steam outlet

You can also regulate the strength of the steam outlet by

turning the steam disc.

When the steam outlet is closed, the steam comes out

of the steam valve which is located on the back of the

device or mask. The water heating phase can also be

shortened by closing the steam disc. To avoid burns, never

touch the steam outlet directly and ensure that the steam

can come out of the valve freely.

Now sit down in front of the device. Bend forward until

your face is above the mask. If the steam feels too hot,

increase the distance in order to avoid burns.

Caution:

During the treatment, you should always turn

the switch back to position 1.

Do not keep your face too close to the mask as otherwise

burns can occur because of the intensity of the steam.

When you want to stop using the device or the water has

evaporated, turn the switch back to position 0.

The device’s indicator goes out.

Rinse your face with cold water after use. Then apply

a face cream or mask. The opened pores let the active

ingredients penetrate deep into the skin.

Do not use the facial sauna for more than 20 minutes per

day. Using it 2-3 times a week is recommended.

The aroma attachment enables you to use medicinal

herbs, oils and other aromatic substances as part of

an aromatherapy treatment. This is the best way for

medicinal herbs, oils and other aromatic substances

that mix with the steam to exert their effect. However,

no solutions containing salt should be used. Only use

medicinal herbs, oils and other aromatic substances that

are intended and suitable for use with a steam mask and

are licensed for this by the producer of these substances.

Use

Open the lid of the aroma attachment. Put a few drops

of the oil on a cotton wool ball or cotton wadding. Put in

the cotton wool ball or cotton wadding and then close the

aroma attachment.

As the mucous membrane of the human nose is very

sensitive, never use the device on position 2 when using

with the nose/mouth steam mask. Do not keep your nose

too close to the mask during use. The treatment should

not last more than 10 minutes per day and should be done

2-3 times a week at the most. Use as described in chapter

USING THE FACIAL SAUNA.

Unplug the device. Let it cool for about 10-15 minutes

before taking the steam mask off the basic unit by turning

it anticlockwise. Empty the water container by holding it

upside down. Clean grease and chalk deposites after each

use with a commercially available decalcication agent

suitable for aluminium.

Use a soft and slightly moistened cloth to clean the

surface of the device and the steam mask and then wipe

the surface dry.

• Do not use harsh agents (e.g. alcohol, acetone, benzine

or abrasives) to clean the plastic parts.

• Unplug before cleaning.

• Do not use any sharp or pointed objects for cleaning.

• Do not immerse the device in water.

4 | USING THE FACIAL SAUNA

3 | OPERATION

2 | INTRODUCTION

5 | HERBS, OILS & AROMATIC SUBSTANCES

6 | USING THE NOSE/MOUTH STEAM MASK

7 | CLEANING & MAINTENANCE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Inventum FS50 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Inventum FS50 Manual

Product: