616173
10
Zoom out
Zoom in
Previous page
1/24
Next page
Before you use the appliance for the first time, please do
as follows: Carefully unpack the appliance and remove all
the packaging material. Keep the material (plastic bags and
cardboard) out of reach of children. Check the appliance after
unpacking for any visible damage, possible from transportation.
Clean the pot, the spatter shield and the forks with warm soapy
water. Dry the parts thoroughly. Make sure that the parts are
completely dry.
Wipe the heating base only with a damp cloth and dry
thoroughly.
The fondue set is suitable for meat fondue (with hot oil), Asian
fondue (with broth), cheese fondue and chocolate fondue.
Place the appliance on a stable and heat resistant surface.
Check that the voltage in your home corresponds with the
voltage printed on the bottom of the appliance. Check that the
thermostat knob is set on MIN and plug the fondue set in.
Fill the pot with oil, broth, cheese or chocolate and place it on
the heating base. Don’t put to much in the pot.
The pot has to horizontal stripes to indicate the minimum and
maximum level. Never fill the pot above the maximum and never
let the content drop below the minimum level.
Turn the thermostat knob clockwise to the required setting. The
red thermostat light lights up.
appliance description
2
before the first use
3
fondueing
4
10 English
1. Forks - 6 pieces
2. Spatter shield
3. Pot
4. Thermostat knob
5. Thermostat light
6. Handles
7. Heating base
7
6
3
4
5
2
1
As soon as the desired temperature is reached, the thermostat
light goes out. The thermostat and the thermostat light will
toggle on and off as the thermostat in the pot maintains the
correct temperature.
Place the spatter shield on the pot as soon as the desired
temperature is reached. The fondue set is now ready to use.
Set the thermostat on a high level for a meat fondue with oil.
For an Asian fondue, cheese- or chocolate fondue set the
thermostat to medium.
The temperature is set correctly when the content is gently
bubbling.
Make sure to slowly heat up the content especially with cheese-
and chocolate fondue to prevent the content from sticking or
boiling over.
Stir regularly with a plastic or wooden spoon to get a smooth
mixture.
Use an oil which is suitable for fondueing when fondueing meat,
such as sunflower oil. Not all oils are suitable and can spatter a
lot.
Put an ingredient to a fork and place the fork in the pan in a
groove of the spatter shield. Note: the forks are sharp. Do not
prod the pan with the forks.
Note: be careful with frozen and wet ingredients. The hot oil
can spatter or may foam.
Do not throw any ingredients in the pot. Always use one of the
forks.
FS236 - instructions.indd 10 27-8-2014 12:03:24
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum FS236 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum FS236 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info