704973
24
Zoom out
Zoom in
Previous page
1/32
Next page
reversing the door opening
9
It is possible to change the door opening from either the left or the right side. To change the opening direction, please follow
these instructions.
Note: Before reversing the door swing, set the thermostat off to [ 0 ] and unplug the appliance from the mains. Empty the
appliance, including the shelves before reversing the door opening.
Remove the cover plates [1] and the screws [2].
Lift the top panel [3] and the cover plate [4] of the appliance.
Remove the top hinge, the screws [5] and the hinge [6].
Remove the door by carefully lifting it from the bottom hinge.
Put the door in a safe place.
Remove the plug [7] from the top of the door and place it on
the opposite side.
Remove the screws [8] and the bottom hinge [9].
Unscrew the adjustable leg [10] and place it on the opposite
side.
Place the bottom hinge [9] on the opposite side with the
screws [8]. Also place the adjustable leg at the right position.
Place the door against the appliance and make sure it is well
fitted on the bottom hinge.
Place the upper hinge [6] on the opposite side with the screws
[5].
Place the cover plate [4] on the opposite side in the top panel
[3].
Place the top panel [3] and fit it with the screws [2]. Refit the
cover plates [1].
Make sure the door is alligned with the outside of the
appliance.
Level the appliance with the adjustable legs.
Leave the appliance to stand for at least 3 hours before
you insert the plug into the socket.
cross shaped screwdriver
thin-blade screwdriver
socket driver
1
2
3
4
5
6
7
9
8
10
reversing the door opening of the freezer - only applicable for model CKV500
Open the door of the freezer compartment a little. Using
a small screwdriver, press the spring in the opening of the
lower door bearing and remove the door.
Place the covering cap [M] on the opposite side.
Turn the door of the freezer compartment 180 degrees
and fit the lower door bearing into the lower door bearing
cavity of the freezer compartment door.
Fit the door in the upper door bearing and at the same
time insert the lower door bearing into the square hole.
24 English
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum CKV500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum CKV500 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info