705091

Inventum CBW010 Manual

13
Zoom out
Zoom in
Previous page
1/28
Next page
switching the kettle off
5
The kettle will automatically switch off when the water is boiled and the pilot lamp will switch off. If you want to boil the water again,
you must wait approx. 30 seconds before you switch it on again, so that the switch can cool down. The kettle can also be switched
off at any time with the switch. When you take the waterkettle off the base while boiling, it will switch off. When you place the
waterkettle back on the base, you must again wait approx. 30 seconds to let the switch cool down before you can switch it back on.
Attention! It may occur that you see condensation on the base. This is completely normal and has no consequences for the use of
the waterkettle.
descaling
6
Scale can form on the inside of the waterkettle. We advise to descale the waterkettle from time to time. Use a suitable
descalingproduct for waterkettles/ coffeemachines and follow the instructions.
You can also descale the waterkettle with lemonjuice. The acid in this juice will remove the scale. This natural method avoids the
use of chemicals. Fill the waterkettle half-full with warm water. Add the juice of half a lemon. Boil the water and leave it to cool for
half an hour. Throw away the boiled water and rinse the waterkettle to remove any remainders. Fill the waterkettle with fresh water
and boil it again. Throw away the water and rinse the kettle once more. Never clean the appliance with detergents. These products
can damage your waterkettle.
To remove the anti-scalefilter for cleaning, take the waterkettle of the base and let it cool down. Do not remove the anti-scalefilter
when the waterkettle is still warm and/or filled with water. Pull the anti-scalefilter straight back out of the spout and clean it with
warm water. Make sure while replacing the filter to place it correctly in the spout. Place the point of the anti-scale filter first and then
push the filter back in place.
Never place the anti-scalefilter loose in the waterkettle.
cleaning & maintenance
7
Clean the waterkettle on regular bases for continues performance. Never immerse the waterkettle, the base or the plug in water
or others liquids. Let the waterkettle cool off and always unplug the appliance before cleaning. Wipe the outside of the waterkettle
with a damp cloth and dry the kettle afterwards. Never use any abrasives!
Attention: never switch the kettle on without water.
If, for whatever reason, the kettle is switched on without water, the dry-boilprotection will automatically switch the kettle off. Put
the switch back up. In this case take the kettle from the base and let it cool down for several minutes. After that, refill the kettle and
switch it on again. Make sure that the lid is closed properly, if not the kettle will go on boiling and will not automatically switch off.
English • 13
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum CBW010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum CBW010 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info