Manual Inventum BC18 (page 31 of 36) (English, German, Dutch, French)

54538

Zoom out

Zoom in

1/36

• Remove

the battery

compartment

cover (left side

of the unit).

• Insert two 1,5

V AAA batteries

(Alkaline Type LR 03). Make absolutely sure that you insert

the batteries with the correct polarity as marked. Do not

use rechargeable batteries.

• Replace the battery cover carefully.

If the change battery icon is displayed, measurement is

no longer possible and you must replace all the batteries.

Note: Batteries containing pollutant substances are marked

as follows: Pb = Battery contains lead, Cd = Battery contains

cadmium, Hg = Battery contains mercury.

It is vital to set date and time. Only this way is it possible to

save and subsequently retrieve your measured values with

the right date and time. Time is shown in 24 hour format.

Note: if you hold down the buttons “down” or “up”,

you can set the values more quickly.

• Press “MODE”. The month starts ashing. Using the buttons

“down” or “up”, set the month 1 to 12 and conrm

with “MODE”.

• Set the day, hour and minute and conrm in each case with

“MODE”.

Setting individual warning limits (Doctor’s function)

After conrming date and time, the warning limits for

systolic and diastolic for each individual user can be set

individually. With the adjustment possibility, medical

instructions in the case of outpatient blood pressure

monitoring can be ideally implemented - Doctor’s function.

Note: the factory-set values are based on WHO guidelines for

high-normal and amount to 130 mmHg (systolic) and 85

mmHg (diastolic) (entry limit range). See the WHO-chart

shown. You must conrm the factory setting in order to

activate the Doctor’s function.

• Setting warning limits always begins with User 1.

• Unless the factory setting has been changed, the display

will read ‘--’.

• You can now alter the limits for systolic pressure with the

buttons “down” and “up” in 5 mmHg stages.

• Conrm the required value with the “MODE” button.

• You can now also change the limits for diastolic pressure

with the buttons “down” and “up” in 5 mmHg

stages.

• With the “MODE” button, save the settings and switch to

the next user memory, you can also save the settings with

“START/STOP” but then you go into measurement mode. If

you do not press any button, the instrument automatically

switches off after one minute.

Note

• From a medical point of view, the distance between

systolic and diastolic should be greater than 30 mmHg. A

systolic limit value below 100 mmHg and a diastolic limit

below 60 mmHg is not recommended.

• According to WHO Guidelines/Denitions and the latest

ndings, the test results can be classied and evaluated

according to the following chart.

4 | INSERTING/ CHANGING BATTERIES

5 | SETTING DATE, TIME & WARNING LIMITS

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Inventum BC18 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Inventum BC18 Manual

Product: