704971

Inventum AS010 Manual

23
Zoom out
Zoom in
Previous page
1/60
Next page
usage
4
The appliance features external controls. Check that the voltage in your home corresponds with the voltage printed on the back
of the appliance and plug it in a socket.
Important: the display will only be illuminated when a key is pressed or a compartment door is opened, at all other times the
display will be in a standby state.
Important: the control panel will automatically lock itself -
. Before adjusting the temperature or selecting any function the
panle must be unlocked by pressing and holding the lock key for 3 seconds until the lock icon disappears from the display.
Note: the standard operating temperature for the cooling compartment should be between 0°C and 4°C. For the freezer
compartment this should be between -18°C and -24°C.
Note: the temperature of the freshly stored food and how often the door is opened, affects the temperature in the cooling
compartment. If required, change the temperature setting.
CONTROL PANEL
1. key for setting the freezer compartment temperature
2. key for function setting
3. key for setting the cooling compartment temperature
4. key lock
DISPLAY
A. Freezer compartment temperature
B. Cooling compartment temperature
C. Vacation icon
D. Quick cool icon
E. Quick freeze icon
F. Locking icon
SETTING THE TEMPERATURE OF THE FREEZER COMPARTMENT
To change the temperature of the freezer compartment, press the key FRZ. TEMP . The temperature of the freezer compartment
can be set between -16°C and -24°C.
Press the key FRZ. TEMP until the required temperature is shown on the display. Please note that during the temperature setting
process the freezer temperature on the display will flash. Once the required temperature is set the freezer temperature will flash
for a few seconds, the display will be automatically locked and after approximately 30 seconds the display turns off.
The temperature of the freezer compartment will be shown in the display when a compartment door is opened or a button is
pressed.
The ice twister ensures you always have ice cubes. Fill the 2 ice cube trays with water, leave it to freeze and turn them over with
the twist knobs.
SETTING THE TEMPERATURE OF THE COOLING COMPARTMENT
To change the temperature of the cooling compartment, press the key REF. TEMP. The temperature of the cooling compartment
can be set between 2°C and 8°C.
Press the key REF. TEMP until the required temperature is shown on the display. Please note that during the temperature setting
process the temperature of the cooling compartment on the display will flash. Once the required temperature is set the cooling
temperature will flash for a few seconds, the display will be automatically locked and after approximately 30 seconds the display
turns off.
The temperature of the cooling compartment will be shown in the display when a compartment door is opened or a button is
pressed.
The appliance now cools continuously until the set temperature has been reached. Do not place anything in the appliance until
the set temperature is reached. This usually takes 2 or 3 hours. Then set the thermostat at the desired setting and place food into
the refrigerator.
Set the appliance on a lower temperature setting when the ambient air temperature rises to maintain the temperature inside the
appliance.
Note:
• Do not put hot food into the refrigerator.
• Never introduce volatile, inflammable or explosive fluids such as alcohol, acetone or petrol because of the risk of explosion.
• It is advisable to wrap meat and fish to avoid odours.
• Leave sufficient space between the food to enable air to circulate correctly between them. Similarly, when storing them, avoid
puttin food items in contact with each other.
• Do not place food items in contact with the cold wall at the back of the appliance. The shelves have a stop to avoid this.
• The door should not be left open any longer than necessary.
1
3
2
4
A B
C
D
E
F
English • 23
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum AS010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum AS010 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info