663662
24
Zoom out
Zoom in
Previous page
1/28
Next page
24 English
ELECTRIC CONNECTION
Make sure the supply voltage ratings correspond with those stated on the rating plate. Plug the appliance in. The cooker hood is
provided with a plug. Make sure the plug remains accessible. Place the socket, if necessary, out of sight behind the exhaust-air pipe.
Attention: if you want to make a fixed connection, ensure that a multi-pole switch with a distance between contacts of 3 mm is
installed in the supply cable.
65
INSTALLING THE COOKER HOOD
The installation of the cooker hood to a duct is similar to the installation for recirculation.
1 Remove the grease filters.
Hold the cooker hood in position on a minimum height of 65 cm above the cooker and mark the bottom of the cooker hood on the
wall/side panel.
Define the middle of the cooker and mark this point at the height of the cooker hood to center it above the cooker.
A = complete width: 565 mm
B = complete height: 182 mm
C = diameter exhaust opening: Ø 120 mm or 150 mm when using an adapter.
2 Mark the position for the exhaust-air pipe. Limit the number of bends and length of the exhaust-air pipe. The cooker hood will
function better.
Saw the holes for the exhaust (C). The exhaust opening has a diameter of 120 mm. Use an adapter if you want to use an exhaust-
air pipe of 150 mm. The hole for the exhaust must be 10 mm wider than the exhaust pipe itself (C + 10 mm).
3 Fit the exhaust pipe at the top of the exhaust outlet and let it hang down.
4 Decide in which way you want to mount the cooker hood - 4a, 4b of 4c.
4a The cooker hood can be mounted to the cabinet with screws through the holes in the side of the housing.
4b The cooker hood can be mounted to the cabinet with screws through the holes at the back of the housing.
4c The cooker hood can be mounted to the cabinet with screws through the holes at the top of the housing.
Remove the cooker hood and drill the holes. Use a Ø3 mm drill. Drill the holes till a depth of 5 mm .
5 Fit the cooker hood inside the cabinet. When the acces to the exhaust is blocked, fit the exhaust pipe to the cooker hood before
placing the cooker hood inside the cabinet.
Also plug the appliance in, in this case, but make sure the fuse box is switched off! Attach the cooker hood to the cabinet with the
screws.
6 Place the grease filters back.
Remove all the protective film before using the cooker hood.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum AKV6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum AKV6000 in the language / languages: English, Dutch as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info