704926
18
Zoom out
Zoom in
Previous page
1/52
Next page
Always follow the installation instructions in the installation manual
(chapter 7) provided.
Check the appliance for transport damage. Do not connect a
damaged appliance.
Faulty parts may only be replaced by original parts. The manufacturer
can only guarantee that original parts meet safety requirements.
If the connecting cable is damaged, it may only be replaced by the
manufacturer, the manufacturer's service organisation or equivalently
qualified persons, in order to avoid dangerous situations.
Always use the original cable and plug to connect the appliance.
The electrical connection must comply with national and local
regulations.
The wall plug socket and plug should always be accessible.
If you want to make a fixed connection, make sure that an omnipolar
switch with a contact separation of at least 3 mm is fitted in the supply
cable.
The appliance should not be connected to the mains via a multi-plug
adapter or extension cable, as the safe use of the equipment cannot
be guaranteed.
Warning: Never open the appliance casing. The casing may only
be opened by a service technician.
Disconnect the appliance from the mains supply before starting any
repair work.
We advise to wear protective gloves when assembling the cooker
hood because of the possible sharp edges.
The distance between the lowest point of the cooker hood and the
supported surface for the cooking pans gas hob should be at least 75
cm. With an electric, ceramic or induction hob this distance should at
least be 65 cm.
If the instructions of the gas hob specify a greater distance, this should
be taken into account.
Warning: failure to install screws or fixing devices in accordance
with these instructions may result in electrical hazard.
If the safety instructions and warnings are not followed, the
manufacturer cannot be held responsible for any resulting
damage.
This appliance is intended to be used in household and similar
applications such as:
18 English
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum AKP9000RVS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum AKP9000RVS in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info