790072
45
Zoom out
Zoom in
Previous page
1/100
Next page
cleaning and maintenance
7
Before cleaning the air conditioner, switch off the appliance by means of the ON/OFF key, wait a few minutes and remove
the plug from the socket.
Cleaning the exterior
Clean the exterior of the appliance with a slightly damp cloth and then wipe it with a dry cloth. If necessary, you can clean
the exterior of the appliance by means of a mild washing-up liquid.
Never wash the appliance with water. This can be dangerous.
Do not use petrol, alcohol or similar solvents to clean the appliance.
Never spray with insect sprays or similar agents.
Do not use aggressive or abrasive cleaning agents for cleaning the appliance.
Never submerge the appliance, cord or plug in water or any other liquid.
Cleaning the air filter
In order to allow the appliance to function as well as possible, we recommend cleaning
the air filter every week. The air filter could get clogged with dust and dirt. Remove the
air filter as shown in the drawing.
Use a vacuum cleaner to remove all the dust from the air filter.
If the air filter is very dirty, you can clean it with lukewarm water.
Submerge the air filter in lukewarm water (max. 40°C) containing a soft cleaning
agent. Rinse the air filter a few times and allow it to dry in the air. Do not place the air
filter in the sun or on the heating to dry it.
Place back the air filter. Check that it is fully dry, before using the appliance again.
Cleaning the air inlets
In order to allow the appliance to function as well as possible, you can clean the air inlets by means of a vacuum cleaner with
a soft brush nozzle.
Start or end of the season
At the start of the season, check that the cord and plug are undamaged. Observe the installation instructions when placing
the appliance.
At the end of the season, make sure there is no condensation water left in the appliance. Drain the water in accordance
with the instructions in section DRAINING CONDENSATION WATER and make sure the air filter is clean before storing
the appliance.
problems and solutions
8
First check the following before submitting the air conditioner for repair.
Problem Possible cause Solution
The appliance does not switch on.
• There is a power interruption
• The plug is not in the socket
• The safety system is activated
• Check the power supply
• Insert the plug in the socket
• Wait 30 minutes before switching
the appliance on again. If the problem
does not go away, contact customer
service.
The appliance only works for a short
period of time
• The air discharge hose has a kink
• The air outlet / discharge is blocked
• Place the air discharge hose as
prescribed. As short as possible and
preferably without bends.
• Check that the air is able to flow
out freely
The appliance does not cool
sufficiently.
• Not all doors and windows are closed. • Make sure all doors and windows
are closed.
• There are heat sources active
in the room.
• Remove the heat sources or switch
them off if possible.
• The air discharge hose has
disconnected from the appliance
• Connect the air discharge hose
to the back of the appliance.
• The appliance is unsuitable
for the room where it is located
English 45
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum AC907W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum AC907W in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 16.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info