790072

Inventum AC907W Manual

42
Zoom out
Zoom in
Previous page
1/100
Next page
Caution:
• Condensation water may run out of the drain when the screw cap is
removed and the appliance has been used in cooling mode.
Keep a drip tray at hand when removing the screw cap, in order to
collect the condensation water.
• Make sure the discharge hose for the condensation water properly
descends and is not higher than the drain of the appliance.
• When using the cooling position, it is recommended to not
discharge the condensation water continuously, but to close
the screw cap again. In this way the appliance is able to provide its best performance.
AIR CIRCULATION
When using this position, the air discharge hose does not have to be connected.
• Press the [ ] key until the indicator light - air circulation - lights up.
• Press the [ ] key to set the wind speed to - high, medium or low.
This is indicated on the display as follows: high speed, medium speed, low speed.
AUTOMATIC POSITION
When using the automatic position, the appliance automatically selects whether it should cool or circulate air. This depends
on the room temperature.
• Press the [ mode / ] key until the indicator light - auto - lights up. The display shows the following:
• It is possible to adjust the wind speed. Press the [ speed / ] key to select the required wind speed.
When the room temperature is below 23°C, the appliance starts to circulate the air, and above 23°C the appliance starts to cool.
ADJUSTING THE TIMER -
The timer function can be used to allow the appliance to switch on automatically (delayed start) or switch off automatically
at a set time (automatic deactivation).
Delayed start
• Switch on the appliance and select the position you want to use.
• Switch off the appliance. The appliance remembers the last setting and will switch on at that position/temperature.
• Press the timer key when the appliance is off and the screen will display 1-24 hours.
• Press the timer key several times until the desired time is displayed. Wait 5 seconds until the timer is confirmed. The
indicator light of the timer lights up and the timer symbol is shown in the display.
• When the set number of hours have passed, the appliance switches on automatically.
To cancel the delayed start, press the timer key once more or press the ON/OFF key .
Automatic deactivation
• Press the timer key when the appliance is on. The display will show hours.
• Press the timer key several times until the desired time is displayed. Wait 5 seconds until the timer is confirmed. The
indicator light of the timer lights up and the timer symbol is shown in the display.
• When the set number of hours have passed, the appliance switches off automatically.
To cancel the automatic deactivation, press the timer key once more or press the ON/OFF key .
42 • English
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum AC907W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum AC907W in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 16.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info