790072

Inventum AC907W Manual

39
Zoom out
Zoom in
Previous page
1/100
Next page
before using for the first time
3
Follow these instructions when using the appliance for the first time: Carefully unpack the air conditioner and all accessories
and remove all packaging material and any promotional stickers.
Keep the packaging (plastic bags and cardboard) out of reach of children.
After unpacking the appliance, carefully check it for external damage that may have occurred during transport.
Place the appliance on a sturdy, flat surface and make sure there is enough space all around for sufficient ventilation.
Check that all mentioned accessories have been supplied.
Clean the air conditioner with a slightly damp cloth.
Prior to connecting the appliance, check that:
• the connection voltage corresponds with what is stated on the information plate;
• the socket and cord are suitable for the appliance;
• the plug of the cord fits in the socket;
• the appliance is placed on a stable and flat surface.
PLACEMENT OF THE AIR CONDITIONER
• The appliance should be placed on a sturdy, flat surface with sufficient free space
around it.
• Do not block the air outlet and ensure a free space of minimum 45 cm around the
appliance.
• After placing the appliance in a straight position, allow it to stand for at least 2
hours before inserting the plug in the socket.
• For the benefit of easy movement, the appliance has been provided with castors.
Carefully roll the appliance over the floor. Make sure the floor is flat and try not to
drive over anything.
• REMARK: Optimum operation of the appliance depends on the length of the
discharge hose and the number of bends. Try to limit both. The supplied flexible
discharge hose has a maximum length of approx. 150 cm and corresponds with the
capacity of the appliance. The use of any other hoses or extensions could cause
failures in the appliance. The air should be able to flow without hindrance, or else
this could lead to overheating of the appliance or condensation of water in the
air discharge hose. Therefore make sure there are no kinks or sharp bends in the
discharge hose. For an optimum result, the discharge hose should be kept shorter
than 1 metre during use of the appliance.
INSTALLING THE AIR DISCHARGE HOSE
Place the appliance near a window or opening, so that the air can flow to the outside via the discharge hose.
1. Carefully pull out the discharge hose until the required length is achieved.
2. Screw the connection piece on one end of the discharge hose.
3. Screw the other connection piece on the other end of the discharge hose.
4. Attach the discharge hose to the air outlet on the rear of the appliance.
5. Hang the other end of the discharge hose to the outside. Ensure a free passage of the hose. Close the window or door
to the extent possible. If necessary, use the window seal set.
English • 39
slide into
Fig. 4
Fig. 3
Fig. 1
Fig. 2
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventum AC907W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventum AC907W in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 16.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info