771744
5
Zoom out
Zoom in
Previous page
1/44
Next page
5
3 4
NOT SURE WHAT A FUNCTION DOES?
Refer to the How to Use Basic Functions
and How to Use Advanced Functions
sections of this manual for a detailed
description of how to use your air conditioner.
SPECIAL NOTE
Button designs on your unit may differ
slightly from the example shown.
If the indoor unit does not have a particular
function, pressing that function s button on
the remote control will have no effect.
TIPS FOR USING REMOTE CONTROL
The remote control must be used within 8
meters of the unit.
The unit will beep when remote signal is
received.
Curtains, other materials and direct
sunlight can interfere with the infrared
signal receiver.
Remove batteries if the remote control
will not be used more than 2 months.
Prevent any liquid from falling into the
remote controller. Do not expose the
remote controller to direct sunlight or
heat.
INSERTING AND REPLACING BATTERIES
INSTALLING REMOTE CONTROL HOLDER
Your air conditioning unit comes with two
AAA batteries. Put the batteries in the
remote control before use:
1. Remove the back cover from the remote
control, exposing the battery compartment.
2. Insert the batteries, paying attention to
match up the (+) and (-) ends of the
batteries with the symbols inside the
battery compartment.
3. Install the back cover on.
The remote controller can be attached to a wall
or stand by using a remote controller holder
(optional part, not supplied with the unit).
Before installing the remote controller, check
that the air conditioner receives the signals
properly.
the remote controller in the holder.
1.
2. Install the holder with two screws.
3. Put
BATTERY NOTES
For optimum product performance:
Do not mix old and new batteries, or
batteries of different types.
Do not leave batteries in the remote control
if you don t plan on using the device for
more than 2 months.
BATTERY DISPOSAL
Do not dispose of batteries as unsorted
municipal waste. Refer to local laws for
proper disposal of batteries.
,
,
Handling The Remote Controller
Remove the back cover
to install batteries
Put the remote controller
in the holder. , (optional part
not supplied with the unit)
Remote LCD Screen Indicators
Information are displayed when the remote controller is powered up:
Transmission Indicator
Lock Indicator
Sleep mode display
Follow me feature
display
Not available for
this unit
Not available for
this unit
Silence feature
display
Lights up when remote
sends signal to indoor
unit
Lights up when Lock
feature is activated.
ON/OFF display
Appears when the unit
is turned on, and disappears
when the it is turned off.
TIMER ON display
( )
Battery display
Fan speed display
Displays selected fan speed:
Temperature/Timer display
Displays the set temperature
by default, or timer setting
when using TIMER ON/OFF
functions
Temperature range:
oooo
17 C-30 C(62 F-86 F)
Timer setting range:
0-24 hours
This display is blank when
operating in FAN mode.
Low battery detection
MODE display
Displays the current
mode, including:
Displays when TIMER
ON is set
TIMER OFF display
( )
Displays when TIMER
OFF is set
This fan speed can not be
adjusted in AUTO or DRY
mode.
Note:
All indicators shown in the figure are for the purpose of clear presentation. But during the actual
operation only the relative functional signs are shown on the display window.
Low speed
Medium speed
High speed
Auto fan speed
Not available for this unit
Horizontal louver
auto swing display
Vertical louver auto
swing display
Turbo mode display
3 4
NOT SURE WHAT A FUNCTION DOES?
Refer to the How to Use Basic Functions
and How to Use Advanced Functions
sections of this manual for a detailed
description of how to use your air conditioner.
SPECIAL NOTE
Button designs on your unit may differ
slightly from the example shown.
If the indoor unit does not have a particular
function, pressing that function s button on
the remote control will have no effect.
TIPS FOR USING REMOTE CONTROL
The remote control must be used within 8
meters of the unit.
The unit will beep when remote signal is
received.
Curtains, other materials and direct
sunlight can interfere with the infrared
signal receiver.
Remove batteries if the remote control
will not be used more than 2 months.
Prevent any liquid from falling into the
remote controller. Do not expose the
remote controller to direct sunlight or
heat.
INSERTING AND REPLACING BATTERIES
INSTALLING REMOTE CONTROL HOLDER
Your air conditioning unit comes with two
AAA batteries. Put the batteries in the
remote control before use:
1. Remove the back cover from the remote
control, exposing the battery compartment.
2. Insert the batteries, paying attention to
match up the (+) and (-) ends of the
batteries with the symbols inside the
battery compartment.
3. Install the back cover on.
The remote controller can be attached to a wall
or stand by using a remote controller holder
(optional part, not supplied with the unit).
Before installing the remote controller, check
that the air conditioner receives the signals
properly.
the remote controller in the holder.
1.
2. Install the holder with two screws.
3. Put
BATTERY NOTES
For optimum product performance:
Do not mix old and new batteries, or
batteries of different types.
Do not leave batteries in the remote control
if you don t plan on using the device for
more than 2 months.
BATTERY DISPOSAL
Do not dispose of batteries as unsorted
municipal waste. Refer to local laws for
proper disposal of batteries.
,
,
Handling The Remote Controller
Remove the back cover
to install batteries
Put the remote controller
in the holder. , (optional part
not supplied with the unit)
Remote LCD Screen Indicators
Information are displayed when the remote controller is powered up:
Transmission Indicator
Lock Indicator
Sleep mode display
Follow me feature
display
Not available for
this unit
Not available for
this unit
Silence feature
display
Lights up when remote
sends signal to indoor
unit
Lights up when Lock
feature is activated.
ON/OFF display
Appears when the unit
is turned on, and disappears
when the it is turned off.
TIMER ON display
( )
Battery display
Fan speed display
Displays selected fan speed:
Temperature/Timer display
Displays the set temperature
by default, or timer setting
when using TIMER ON/OFF
functions
Temperature range:
oooo
17 C-30 C(62 F-86 F)
Timer setting range:
0-24 hours
This display is blank when
operating in FAN mode.
Low battery detection
MODE display
Displays the current
mode, including:
Displays when TIMER
ON is set
TIMER OFF display
( )
Displays when TIMER
OFF is set
This fan speed can not be
adjusted in AUTO or DRY
mode.
Note:
All indicators shown in the figure are for the purpose of clear presentation. But during the actual
operation only the relative functional signs are shown on the display window.
Low speed
Medium speed
High speed
Auto fan speed
Not available for this unit
Horizontal louver
auto swing display
Vertical louver auto
swing display
Turbo mode display
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Inventor V5MFI32-60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Inventor V5MFI32-60 in the language / languages: English as an attachment in your email.

The manual is 2.48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Inventor V5MFI32-60

Inventor V5MFI32-60 Usermanual and installation guide - English - 136 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info