Manual Inventor IW14BL (page 11 of 116) (English, German, French, Italian, Spanish)

771763

Zoom out

Zoom in

1/116

4. Remove the three plastic caps from

the side you are going to install the door,

and place them on the side where the

door was originally installed, in order to

cover the three screw holes.

5. Place the door on the desired side making

sure it is in its upright position. Screw the top

two screws of the door hinge. Slightly tilt,

for better positioning, and screw the

bottom hinge into place, and also

screw the removed foot on the

other side. Once completed clip

on the top plastic cap.

6. Check if door is aligned horizontally

and vertically and that the door when

shut is completely sealed from all sides.

Finally tighten the bottom hinge and re-

adjust the foot on the opposite side for

correct leveling.

Leveling the Unit

Adjust the two levelling feet at

the front of the unit. If the unit

is not aligned, the door and

magnetic seal alignments will

not be covered properly.

✔

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Inventor IW14BL in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 9.03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Inventor IW14BL Manual

Product: