Manual Inventor INVMS42A2 (page 13 of 116) (English, German, French, Italian, Spanish)

771780

Zoom out

Zoom in

1/116

Prior to cleaning the appliance, un-

plug from the wall power socket,

and remove all shelves.

• Clean the appliance with a

moist soft cloth. Use only neutral

detergents.

• Clean the unit’s interior with a

weak bicarbonate soda solution

and rinse with warm water applying

a damp sponge or cloth.

• Use a damp cloth to clean the

exterior, keep in mind the door must be shut to avoid getting any polish on the magnetic

door seal or the interior of the unit.

• Upon cleaning, rinse the interior with clean water and dry.

• Allow the appliance to dry for

approximately 1 to 2 hours.

• Set thermostat to middle position.

Plug into a power source. The

appliance will chill continuously until

set temperature has been reached.

• Frequently the air vents and the

condenser must be cleaned located

at the rear end of the appliance,

using a vacuum cleaner or a brush. The

condenser should always be clean, free of

dust or any other impurities.

• Do not use abrasive products, abrasive cleaning pads,

solvents or metal objects. Do not use water spray and

steam to clean the appliance.

• Do not use extreme moist cleaning pads. Any moisture

around the electric components, should be avoided.

• The use of a steam cleaner is prohibited, as this may

be very dangerous.

9. MAINTENANCE & CLEANING

Clean the

interior of

the appliance

ONCE A

MONTH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Inventor INVMS42A2 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 9.7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Inventor INVMS42A2 Manual

Product: