Manual Inventor INVMS207A (page 12 of 38) (English)

771779

Zoom out

Zoom in

1/38

9. DISPOSAL

Old units sll have some residual value. An environmentally friendly method of disposal will

ensure that valuable raw materials can be recovered and used again. The refrigerant used in your

unit and insulaon materials require special disposal procedures. Ensure that none of the pipes

on the back of the unit are damaged prior to disposal. Up to date informaon concerning opons

of disposing of your old unit and packaging from the new one can be obtained from your local

council oﬃce.

When disposing of an old unit break of any old locks or latches and remove the door as a

safeguard.

Correct Disposal of this product

This marking indicates that this product should not be disposed with other

household wastes throughout the EU. To prevent possible harm to the environment

or human health from uncontrolled waste disposal, recycle it responsibly to

promote the sustainable reuse of material resources. To return your used device,

please use the return and collecon systems or contact the retailer where the

product was purchased. They can take this product for environmental safe recycling.

For more informaon, please contact the local authority or your retailer where you purchased

the product.

If it is the outer condenser, the rear wall should be always clean free of dust or any impuries.

The appliance should be located in the coolest area of the room, away from heat producing

appliances or heang ducts, and out of the direct sunlight.

Let hot foods cool to room temperature before placing in the appliance. Overloading the

appliance forces the compressor to run longer. Foods that freeze too slowly may lose quality, or

spoil.

Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance.

This cuts down on frost build-up inside the appliance.

Appliance storage bin should not be lined with aluminum foil, wax paper, or paper toweling.

Liners interfere with cold air circulation, making the appliance less eﬃcient.

Organize and label food to reduce door openings and extended searches. Remove as many

items as needed at one me, and close the door as soon as possible.

8. TIPS FOR ENERGY SAVING

Try not to open the door too oen, especially when the weather is wet and hot. Once you open

the door, close it as soon as possible.

Every now and then check if the appliance is suﬃciently ventilated (adequate air circulaon

behind the appliance).

In normal temperature conditions, please arrange the thermostat at the middle seng.

Before loading the appliance with packages of fresh food, make sure they are cooled to ambient

temperature.

Ice and frost layer increase energy consumpon, so clean the appliance as soon as the layer is 3-5

mm thick.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Inventor INVMS207A in the language / languages: English as an attachment in your email.

The manual is 10.03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Inventor INVMS207A Manual

Product: