785823

Invacare Scorpius Manual

19
Zoom out
Zoom in
Previous page
1/212
Next page
Scorpius
Instruction Booklet
1654767~D
19
•
Each country may supply different chargers. The charging procedure may be different from
below. Chargers for lithium batteries and lead-acid batteries (optional) are different.
•
The charger LED light should indicate red when pre-charging. If not, please contact your
authorized dealer.
•
Inspect the battery charger before each use, make sure connectors are dry and clean. Do not
attempt to use an extension cord to plug in your battery charger.
•
Do not use other brands of charger to charge the scooter. Only use the charger equipped with
originally.
•
The battery charger is equipped with a cooling fan. If the fan does not appear to be working
correctly, please turn off the charger immediately as it may be overheated. Please contact your
authorized scooter dealer.
•
Do not leave the charger plugged into your scooter with charger switched off as this may
discharge your batteries. Always unplug the cables when finished charging.
•
Be aware that the battery charger case may become hot during charging. Please avoid skin
contact.
•
Keep the charger stored in a well-ventilated area. Do not drop the charger.
Lead-Acid Battery Charger (Optional):
Output Voltage: 100 V~240 V (Figure 24)
1.
Charger output cable, 3-pin connector (U)
2.
AC power cord (V)
3.
LED indicator (W)
-
RED LIGHT ON: Pre-charging
-
ORANGE LIGHT ON: Normal charging
-
GREEN LIGHT ON: Fully charged.
4.
It takes 7 hours for a full charge. Remove the AC plug first
after charging.
Charging Operation:
There are two charging ports: one is at the top of the scooter, and the other one is on the battery box.
Upper Charge Port (Figure 25)
1.
Open the charge port cap.
2.
Insert the charger output cable into the charge port.
3.
Plug the AC cord into a standard electrical outlet on the wall.
4.
Check the charger LED indicator. Make sure it is in normal charging state. During charging, LED will
indicate orange light.
5.
When unplugging, please make sure to remove the AC cord from the wall first, and then the charger
output cable from the charge port.
Figure 25
Battery Box Charge Port (Figure 26)
1.
Remove the battery box from the scooter and place it on flat ground.
2.
Open the charge port cap and insert the charger output cable into the charge port
3.
Plug the AC cord into a standard electrical outlet on the wall.
4.
Check the charger LED indicator. Make sure it is in normal charging state. During charging, LED will
indicate orange light.
5.
When unplugging, please make sure to remove the AC cord from the wall first, and then the charger
output cable from the charge port.
6.
Put the cap back to cover the charging port before installing the battery box back in the scooter.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Invacare Scorpius at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Invacare Scorpius in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 8.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info