785824
13
Zoom out
Zoom in
Previous page
1/240
Next page
Scorpius-A
Instruction Booklet
1656610~D
13
Factory Default Password: 1234
If there is a type error, press the (E) key or power switch button again to re-enter the password.
If there is a type error, press the power switch button again or wait for 30 seconds to re-enter the
password. Scooter must be unlocked before you can reset the password. If you forget the password,
please unlock the scooter by RF remote control.
The sensor transmit is up to 20 mm. However, please keep the distance between RF sensor and
panel as close as possible.
Do not dissemble the RF remote. The inner sensor chip may be damaged.
Do not turn off the power while unlocking the scooter, no matter whether it is digital unlock or RF
sensor unlock. The user will need to turn the power back on and re-unlock again if unlocking is
interrupted.
The scooter cannot be operated unless it is unlocked (green light on).
Power Switch:
Press the button to turn on/off the power
Power standby (locked) - red light
Power on (unlocked) - green light
Power off - light off
Auto-power off:
Power will automatically be off in 30 seconds if no
activity is detected during power standby period
(locked, red light) to prevent tap error.
Figure 6
Digitally Unlock Your Scooter:
Press the power switch. The power (red light) will be on
standby for you to unlock.
To unlock, enter your password on the number pad (D).
Light indicator (C) will light up each time the number is
entered. Press (E) on the pad when password entering is
finished. (Figure 7)
The power light will turn green when the scooter is
successfully unlocked.
(C)
(D)
(E)
Figure 7
Password Setting:
Once scooter is unlocked (power green light on), press and hold the (E) key for 3 seconds. The pad light
will be flashing three times.
Enter your password on number pad (D). The password can be a 1-4 digits number. Digits can be
repeated. Light indicator (C) will light up each time the number is entered.
Press (E) on the pad when password entering is finished. Pad light will be flashing three times.
RF Sensor Unlock Your Scooter:
Press the power switch. The power (red light) will be on
standby for you to unlock.
To unlock, place the RF remote to the panel (spot near
power switch for best reading result). (Figure 8)
The power light will turn green when the scooter is
successfully unlocked.
Figure 8
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Invacare Scorpius-A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Invacare Scorpius-A in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 9.38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info