Manual Intex SSP-10-1 PureSpa (page 18 of 27) (English)

784580

Zoom out

Zoom in

1/27

346

S AVE THESE INSTRUCTIONS

(346PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/10/2019

English

Page 18

MAINTENANCE AND CHEMICALS

Water Sanitation

The spa owner must regularly check and keep the spa water sanitized with scheduled maintenance (daily, if

necessary). Adding sanitizer and other chemical will control bacteria and viruses present in the spa water.

The maintenance of a proper water balance through appropriate use of sanitizers is the single most important

factor in maximizing the life and appearance of the spa tub as well as ensuring clean, healthy and safe water.

Proper technique is important for water testing and treating the spa water. See your pool/spa professional for

chemical, sanitizer, test kits and testing procedures questions.

CAUTION: ALWAYS FOLLOW THE CHEMICAL MANUFACTURER’S DIRECTIONS, AND THE

HEALTH AND HAZARD WARNINGS.

Do not add chemicals if the spa is occupied. This can cause skin or eye irritation. Concentrated chlorine

solutions can damage the spa tub. In no event is Intex Recreation Corp., Intex Development Co. Ltd., their

related companies, authorized agents and service centers, retailers or employees liable to the buyer or any other

party for costs associated with the loss of spa water, chemicals or water damage.

Maintenance of Spa Water and Cartridge

Protect all the spa occupants from possible water-related illnesses by keeping the spa water clean and sanitized.

Always practice good hygiene. To ensure proper spa water quality follow these procedures:

1. Inspect and clean the ﬁ lter cartridge once a week, and change the ﬁ lter

cartridge as needed.

a. Unscrew the cartridge housing assembly from the spa tub wall and

remove the cartridge (see drawing 13).

b. Use a garden hose to rinse off the cartridge. If the cartridge remains

soiled and discolored it should be replaced. Keep spare cartridges

on hand.

c. Reinstall the clean cartridge back into the cartridge housing and

replace the cartridge housing assembly back onto the spa tub wall.

2. Change the spa water every 2~3 months, or it becomes cloudy and proper

water chemistry does not clear it up. See “Spa Tub Drainage” and “Spa

Tub Cleaning” sections for details.

3. Use spa chemicals to maintain proper water chemistry. Spa damage

resulting from misuse of chemicals and mismanagement of spa water

is not covered by the warranty.

4. All occupants must shower before entering the spa.

Water Chemistry Balance

Maintain the spa water pH level between 7.2 and 7.8, total alkalinity level between 80 and 120 ppm and free

chlorine level between 2 to 4 ppm.Use the included test strips to test the spa water chemistry before each use

of the spa and continue to test the water no less than once a week.

The Test Strips can test the “Free Chlorine”, “pH”, “Total Alkalinity” and “Calcium Hardness” levels at the same

time:

1. Dip the entire strip into the water and remove immediately.

2. Hold the strip level for 15 seconds. Do not shake excess water from the strip.

3. Compare the strip pad to the color chart on the packaging label. If necessary, adjust the chemical level

in the pool water.

NOTE: Check the expiry date of the test kit as the test results may be inaccurate if the kit is used after that date.

Low pH will damage the spa tub and pump. Damage resulting from chemical imbalance is not covered by the

warranty.

Use the included chemical ﬂ oater dispenser to administer chlorine [chemical tablet size: less than 1” (2.5 cm)

diameter] into the spa water. Add 1 tablet into the dispenser. Always follow the chemical manufacturer’s

directions. Remove the chemical ﬂ oater dispenser when the spa is in use.

Never let chlorine come in contact with the spa tub if it is not completely dissolved.

Flush all pipes with treated water by activating the bubble function for an hour a day.

IMPORTANT: Press the

button on the spa control panel to turn on the bubble air blower and help dissolve

the chemicals into the water. Never mix chemicals together. Add the chemicals to the spa water separately.

Thoroughly dissolve each chemical before adding another one to the water.

WARNING

Always unplug this product from the electrical outlet before removing, cleaning, servicing or

making any adjustment to the product.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Intex SSP-10-1 PureSpa in the language / languages: English as an attachment in your email.

The manual is 3.12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Intex SSP-10-1 PureSpa Manual

Product: