686577
7
Zoom out
Zoom in
Previous page
1/22
Next page
193
GS
SAVE THESE INSTRUCTIONS
(193GS) MODEL SF90220RC SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 07/27/2015
English
POOL INLET - NOZZLE & PLUNGER VALVE SETUP (optional)
1. In a counter-clockwise motion unscrew plunger valve
union from the threaded strainer connector (26) (see
drawing 5). Be careful not to lose the step rubber
washer
(23). Place the plunger valve on the ground in a
safe place.
2. In a counter-clockwise motion unscrew the strainer nut
(24) from the threaded connector (26). Leave the flat
washer
(25) on the connector (26).
3. Install the nozzle and plunger valve at the upper
position of pool inlet. From the inside of the pool liner
insert the connector (26) into one of the pre-cut holes
with the washer remaining on the connector to be
placed against the inside of the liner wall.
4. Before assembly, lubricate the threads with a
petroleum jelly. With the flat side of the strainer nut (24)
facing the outside wall of the liner in a clockwise motion
screw the strainer nut (24) back onto the threaded
connector
(26) (see drawing 6).
5. Finger tighten the adjustable pool inlet nozzle (27) and
the strainer nut (24) onto the threaded connector (26).
6. Grasp the plunger valve assembly. Make sure the step
(23) is in place.
7. In a clockwise motion screw the plunger valve union
back onto the threaded connector (26) (see drawing 7).
8. In a clockwise motion turn the plunger valve handle to
close position. Ensure the plunger valve is securely
closed. This will prevent water from flowing out during
filling of the pool (see drawing 8).
9. Adjust the direction of nozzle head pointing away from
the pool outlet for a better circulation result (see
drawing 9).
10. The pool liner is now ready to fill with water. Consult the
above-ground-pool owner’s manual for filling
instructions.
5
9
2
1
7
1
2
8
INSIDE
LINER WALL
6
25 26 27
INSIDE
LINER WALL
24
WATER
FLOW
POOL
Page 7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intex SF90220RC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intex SF90220RC in the language / languages: English as an attachment in your email.

The manual is 4,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Intex SF90220RC

Intex SF90220RC User Manual - German - 21 pages

Intex SF90220RC User Manual - Dutch - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info