Manual Intex SF80110-2 (page 16 of 24) (English)

752308

Zoom out

Zoom in

1/24

342

SAVE THESE INSTRUCTIONS

(342PO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/08/2018

English

Page 16

OPERATING INSTRUCTIONS (continued)

Operating the system under “TIMER” mode or manually:

To operate the sand filter pump in “FILTER” mode under “TIMER” control:

1. Activate the unit:

Press button. Flashing code “00” appears on the LED display, indicating

that the unit is ready to be programmed.

2. Set operating hours:

With code “00” flashing, press button to set the desired operating

hours. See the “Operating Time Table” for the required operating

hours related to each pool size. Pressing will increase the time

from 01 to 12 hours maximum. If you have selected too many hours

keep pressing to repeat the cycle. The built-in timer will now

activate the Sand filter pump, at the same time each day, for the

number of hours you have set.

3. Lock keypad controls:

With the desired hour value showing, press button until you hear a “beep”. Locking the

control buttons into this setting prevents unauthorized changing of the operating cycle.

NOTE: If you forget to lock the keypad controls, the system will automatically lock it and start

working 10 seconds later.

The sand filter pump is now filtering the water and will stop after the operating hours are

completed.

4. Readjust operating time if necessary:

The operating hours can be re-adjusted if necessary. Press button until you hear a “beep”

to unlock the keypad and the current programmed time will flash. Repeat steps 2 to 3.

5. Stand-by/power saving mode:

• When the cycle ends, the LED display shows “00”. The system is

now in Stand-By mode. After 5 minutes the system goes into Power

Saving mode and the LED display shows “.”. The system will

automatically turn itself back on in 24 hours.

• While the system is in Power Saving mode, press any button and the

system will briefly display the programmed time and then “00”.

To view the TIMER preset hours:

While the pump is operating, press button, the display will briefly flash the preset hours for 10

seconds and then display back the remaining operating hours.

To operate the sand filter pump manually (without the “TIMER” mode):

1. To run the pump alone without the “Timer”, press button to turn

on the pump, then press button until the LED displays “FP”, this

indicates that the TIMER is off and the pump is now operating continuously.

2. To stop the pump, press button again.

(1 to 12 hours max per cycle)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Intex SF80110-2 in the language / languages: English as an attachment in your email.

The manual is 5,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Intex SF80110-2 Manual

Product: