752503
14
Zoom out
Zoom in
Previous page
1/18
Next page
120A
SAVE THESE INSTRUCTIONS
(120IO) SEQUOIA SPIRIT™ WOOD-GRAIN FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 06/16/2014
English
Page 14
POOL ENCLOSURE SETUP (continued)
4c. Other side panel installation
For 49” height pool, install the rest of the side panels by using eight pieces of side boards A (20) each.
For 53” height pool, install the rest of the side panels by using one piece of side board B (21) at the
bottom plus eight pieces of side boards A (20) each. Install the side boards one by one from bottom to
top. Insert the groove of the first side board onto the vertical edge of the bottom rail, and the groove
of the other side boards onto the tongue of each previous board. The side boards with wood veins
printed need to be faced outward (see drawings 13.1 & 13.2).
5. Top Board Installation
Attach the top board (15) on the top of the side panel, with the holes at its two ends aligning with the nuts
on the top clamps (16). Make sure the groove underneath the top board fits firmly onto the tongue of the
top board (15). Repeat this procedure until all the top boards are fixed to the top clamps and side boards.
NOTE: There are four pieces of top board which are printed with warnings. Install those four top boards
three pieces apart from each other (see drawings 14.1, 14.2 & 14.3).
6. Top Clamp Cover Installation
Install the top clamp cover (14) where the two top boards meet. Insert the ridge of top clamp cover into
the slot on the top end of the support post. Align the top holes on top clamp cover with the nuts of the top
clamp. Insert and screw bolt (13) to each of the threaded holes by using the wrench (26) provided, and
then cover with the waterproof caps (12). Repeat this procedure until all the top clamp covers are fixed to
the top clamps and support posts (see drawings 15.1, 15.2 & 15.3).
14.1 14.2 14.3
13.1 13.2
15.2 15.3
15.1
NOTE: Drawings for illustration
purpose only.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intex Sequoia Spirit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intex Sequoia Spirit in the language / languages: English as an attachment in your email.

The manual is 3,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Intex Sequoia Spirit

Intex Sequoia Spirit User Manual - German - 18 pages

Intex Sequoia Spirit User Manual - Dutch - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info