752503
7
Zoom out
Zoom in
Previous page
1/18
Next page
120A
SAVE THESE INSTRUCTIONS
(120IO) SEQUOIA SPIRIT™ WOOD-GRAIN FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 06/16/2014
English
Page 7
Unacceptable
Grade
Acceptable
Grade
Do not add RemoveRemove
A
A
B
Always remove material from the top of the
slope rather than filling in the bottom.
2.1
GROUND PREPARATION
Select an outdoor location for the pool which should be on a level concrete pad. If there is no concrete pad
available, follow the instructions below to prepare the installation area. It is important you ask a professional
(builder or gardener) to perform the following ground preparation.
NOTE: Tools are not included.
1. Mark the installation area
Once the location area is chosen, drive stake at
center point of where you wish pool to be located.
Attach string to center stake. Measure the length
A on string, and attach marking stick, paint marker,
or funnel with flour to string. Mark circumference of
pool area using string and marker (see drawing 1.1).
For 15'8" (478 cm) pool, where
A = 8’3” (251.5 cm) = Radius of grass area need to
be removed and leveled.
For 16'8" (508 cm) pool, where
A = 8'9” (266.7 cm) = Radius of grass area need to
be removed and leveled.
For 18’8" (569 cm) pool, A = 9'9" (297.1 cm)
see drawing 1.2.
2. Clear the installation area
Remove all grass, stones and sticks from marked area. Also remove center stake and string.
3. Leveling
Establish lowest point in pool area. Level entire pool site by digging or scraping away uneven areas
to the level of the lowest point. Always remove material from the top of the slope rather than
filling in the bottom to ensure greater ground stability and firmness. When all the areas are level and
when excess ground is removed, you may fill any small low areas which are left to level (with fined
dirt). Always compact and level ground afterwards (see drawing 2.1).
POOL SETUP (continued)
1.1
A
A
B
1.2
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intex Sequoia Spirit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intex Sequoia Spirit in the language / languages: English as an attachment in your email.

The manual is 3,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Intex Sequoia Spirit

Intex Sequoia Spirit User Manual - German - 18 pages

Intex Sequoia Spirit User Manual - Dutch - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info