752329
35
Zoom out
Zoom in
Previous page
1/38
Next page
351
A
S AVE THESE INSTRUCTIONS
(351IO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 09/30/2020
English
Page 35
WIFI APP TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
WIFI PAIRING /
BINDING FAILURE
DURING THE
FIRST TIME
SETUP
Spa control base does
not support WiFi App
function, wrong model.
Spa wireless control
panel does not support
WiFi App function.
Only compatible with the following models: SB-HWF10,
SB-HWF20, SC-WF10 or SC-WF20, printed on the spa control
base electrical rating label.
Make sure the spa wireless control panel has the WiFi signal
icon .
Make sure the spa control base and wireless control panel are
both compatible and support WiFi App function.
Contact Intex Service Center.
Wrong version of mobile
device
Ensure the right version of mobile devices:
a. iOS - Apple iPhone 6, 6 Plus and greater. Tablet compatibility is
not optimized.
b. Android – All Android phones. Tablet compatibility is not
optimized.
Incompatible mobile
device operating system
Ensure the right version of operating system:
a. Apple devices – iOS 12.3 and greater.
b. Android devices – Android 4.04 and greater. For 6.0 and greater
version, you must turn on the GPS signal on your mobile device
for the fi rst time pairing. Once you have successfully paired the
spa and save it, you may turn off the GPS signal.
Wrong router network
band
Make sure you are connecting to a 2.4GHz network and try to
pair the mobile device with the spa control panel again.
Wrong network name Make sure you are connecting to the right WiFi router signal and
try to pair the mobile device with the spa control panel again.
Make sure your mobile device and spa control panel are
connected to the same WiFi router signal.
Wrong WiFi password Ensure correct WiFi router password. See WiFi pairing/binding
section.
The setup spa location
is too far from your WiFi
router signal coverage
range.
Ensure your mobile device is connected to your WiFi router and
can access and browse the internet.
Remove the wireless control panel from the control base and
bring it closer to your WiFi router while making sure it’s within 5m
(16ft) distance of the control base in order to prevent activating
the error code E81 (transmission signal failure). Then try to pair
the spa control panel with your mobile device. If it can be paired,
your spa is too far away and you need to make sure the entire
SPA is within your WiFi router signal coverage range.
If you cannot move your spa, then you need to move your WiFi
router or add a repeater/signal booster so that you can receive
signals from your WiFi router at your setup spa location.
Try to pair the mobile device with the spa control panel again.
The App does not load Force-quit the App, re-launch the App and try to pair the spa
control panel with your mobile device again.
Uninstall the “Spa Management App” and reinstall it again. See
WiFi pairing/binding section.
WiFi LED indicator off /
blank
WiFi LED indicator fast
ashing
WiFi LED indicator slow
ashing
Not connected, WiFi pairing not successful within 2 minutes after
touching the WiFi pairing button on the spa control panel.
Try to pair the spa control panel with your mobile device again.
See WiFi pairing/binding section.
Power off the spa control base and the wireless control panel,
restart the spa and try to pair the spa control panel again.
If the problem persists, contact Intex Service Center.
Wrong WiFi pairing /
binding sequence
Refer to “WiFi pairing / binding” section
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intex PureSpa SC-WF20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intex PureSpa SC-WF20 in the language / languages: English as an attachment in your email.

The manual is 5,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Intex PureSpa SC-WF20

Intex PureSpa SC-WF20 User Manual - German - 38 pages

Intex PureSpa SC-WF20 User Manual - Dutch - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info