720173
29
Zoom out
Zoom in
Previous page
1/34
Next page
344
NLA
S AVE THESE INSTRUCTIONS
(344NL) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 08/09/2019
English
Page 29
MAINTENANCE (continued)
STORAGE
Spa Surround
Barefoot areas and relaxing areas around the spa shall be cleaned on a regular basis. No cleaning water
may ow into the spa or spa water cycle. The dirt and cleaning agents shall be rinsed carefully to drain in
the spa surround.
Spa Tub and Cover Air Bladder Repair
Use the enclosed repair patch to repair any puncture:
Clean and dry the area to be repaired thoroughly.
Remove the patch backing paper and press patch rmly over the puncture. Smooth out the surface to
remove any air bubbles under the patch.
In regions subject to freezing temperatures, drain, clean, disassemble and properly store the spa set and
related components indoors when the temperature drops below 4°C (39°F).
1. Drain and clean the spa following the “Spa Tub Drainage” and “Spa Tub Cleaning” sections.
2. Reverse set up instructions to de ate and disassemble the spa tub, spa control unit and spa cover air
bladder.
3. To de ate the tub and the cover air bladder:
a) Open the de ation outlet cap (34) with the included bolt
wrench
(6) (see drawing 17).
b) Insert de ation hose adaptor (35) into the de ation outlet.
c) Insert in ation hose (7) over the de ation hose adaptor (35).
d) Insert the other end of the in ation hose into the tub air
valve or cover air bladder valve.
e) Press the air bubble button to de ate.
f) When de ation is completed reverse above steps and
ensures the de ation outlet cap (34) is securely fastened.
Caution: Only use for the purpose described in this manual.
Keep the in ation hose away from water or small objects
when the de ation function is activated to avoid damage to
the blower motor.
4. Make sure all the spa components and accessories are
thoroughly clean and dry before storage. Air-dry the spa tub
in the sun for an hour before folding.
5. Fold the spa tub loosely and avoid any sharp corners to
prevent damage or leakage to the spa tub liner.
6. Prepare additional new cartridges for next time use.
7. Store the spa tub and accessories indoors, in a dry, temperature controlled, between 0º – 40ºC
(32º – 104ºF), storage location.
8. The original packing can be used for storage.
17
6
7
35
1
34
2
3
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intex Purespa Jet And Bubble Deluxe SC-20N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intex Purespa Jet And Bubble Deluxe SC-20N in the language / languages: English as an attachment in your email.

The manual is 5,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Intex Purespa Jet And Bubble Deluxe SC-20N

Intex Purespa Jet And Bubble Deluxe SC-20N User Manual - German - 34 pages

Intex Purespa Jet And Bubble Deluxe SC-20N User Manual - Dutch - 35 pages

Intex Purespa Jet And Bubble Deluxe SC-20N User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info