686043
10
Zoom out
Zoom in
Previous page
1/27
Next page
264
A
S AVE THESE INSTRUCTIONS
(264IO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 10/07/2015
English
Page 10
SET UP (continued)
6. Disconnect the in ation hose (7) from the air valve and attach the pressure gauge (5) to the air valve.
The pressure gauge indicator should be in the green area for a properly in ated spa tub (see drawing 6).
Repeat previous steps to add more air if necessary.
7. Replace the air valve cap back.
NOTE: The cap is designed to be screwed on and off. Never exert force as this could cause the
complete internal in ation system of the valve to come loose. See “Spa Tub Air Valve Fastening” for
valve maintenance.
In ate the Spa Cover Air Bladder
1. Open the in ation valve and insert the in ation
hose
(7) into the valve; press to in ate
until it is rm to the touch but not hard (see
drawing 7).
2. Disconnect the in ation hose (7) from the air
blower in ation outlet and the valve.
3. Replace the control base in ation cap (9) back;
close and recess the in ation valve.
NOTE: If there is a need to add some air to the spa tub wall or spa cover air bladder after they have been
setup, refer to above “In ate the Spa Tub Wall” and “In ate the Spa Cover Air Bladder” sections. The cover
air bladder is preinstalled inside the spa cover. If it needs to be reinstalled, place the unin ated air bladder
inside the spa cover lip before in ating the bladder.
5
4
7
1 2
6
5
1
2
3
9
24
4. Press the button to turn on the control unit panel buttons rst. Press the button to in ate the
spa tub wall until it is rm to the touch but not hard (see drawing 5).
IMPORTANT: Do not over in ate or use high pressure air compressor to in ate.
5. Press the button again to turn it off.
7
7
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intex PureSpa - SJB-HS-22 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intex PureSpa - SJB-HS-22 in the language / languages: English as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Intex PureSpa - SJB-HS-22

Intex PureSpa - SJB-HS-22 User Manual - German - 29 pages

Intex PureSpa - SJB-HS-22 User Manual - Dutch - 28 pages

Intex PureSpa - SJB-HS-22 User Manual - French - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info