686042
23
Zoom out
Zoom in
Previous page
1/27
Next page
265
A
S AVE THESE INSTRUCTIONS
(265IO) SPA (JET + BUBBLE) ENGLISH 7.5” X 10.3” PANTONE 295U 08/20/2014
English
IMPORTANT
The ambient temperatures of air have an effect on the spa tub internal pressure. Air inside of the
spa tub may expand and contract with varying temperature leading to reduce pressure inside
of the spa tub. If this occurs, simply use the provided pressure gauge to check the internal air
pressure and add more air if necessary.
Page 23
MAINTENANCE (continued)
STORAGE
Spa Tub and Cover Air Bladder Repair
Use the enclosed repair patch to repair any puncture:
Clean and dry the area to be repaired thoroughly.
Remove the patch backing paper and press patch rmly over the puncture. Smooth out the surface to
remove any air bubbles under the patch.
1. Drain and clean the spa following the “Spa Tub Drainage” and “Spa Tub Cleaning” sections.
2. Reverse set up instructions to de ate and disassemble the spa tub, spa control unit and spa cover air
bladder.
3. To de ate the tub and the cover air bladder:
a) Open the de ation outlet cap (34) with the included bolt
wrench
(6) (see drawing 17).
b) Insert de ation hose adaptor (35) into the de ation outlet.
c) Insert in ation hose (7) over the de ation hose adaptor (35).
d) Insert the other end of the in ation hose into the tub air valve
or cover air bladder valve.
e) Press the air bubble button to de ate.
f) When de ation is completed reverse above steps and
ensures the de ation outlet cap (34) is securely fastened.
Caution: Only use for the purpose described in this manual.
Keep the in ation hose away from water or small objects when the
de ation function is activated to avoid damage to the blower motor.
4. Make sure all the spa components and accessories are thoroughly
clean and dry before storage. Air-dry the spa tub in the sun for an
hour before folding.
5. Fold the spa tub loosely and avoid any sharp corners to prevent
damage or leakage to the spa tub liner.
6. Prepare additional new cartridges for next time use.
7. Store the spa tub and accessories in a dry, temperature controlled,
between 0º – 40ºC (32º – 104 ºF), storage location.
8. The original packing can be used for storage.
17
6
36
35
1
2
3
34
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intex PureSpa - SJB-HS-20-1C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intex PureSpa - SJB-HS-20-1C in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Intex PureSpa - SJB-HS-20-1C

Intex PureSpa - SJB-HS-20-1C User Manual - German - 29 pages

Intex PureSpa - SJB-HS-20-1C User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info