Manual Intex PureSpa - 28474 (page 18 of 21) (English)

686039

Zoom out

Zoom in

1/21

254

S AVE THESE INSTRUCTIONS

(254IO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 01/28/2016

English

Spa Tub Drainage

1. Turn off the spa control unit.

2. Connect the drain valve adaptor to a garden hose and point the other end

of the garden hose to a suitable draining area (see drawing 14).

3. Remove the drain valve cap from outside of the spa tub and attach the

drain valve adaptor to the drain valve (see drawing 14).

4. From inside of the spa tub, open the drain valve cap, water will start

ﬂ owing out from the garden hose.

5. When the water stops draining, disconnect the spa control unit from

the spa tub wall. Lift the spa tub wall from the side opposite the drain,

leading any remaining water to the drain and emptying the spa completely

(see drawing 15).

6. Attached the inﬂ ation hose (7) to the air blower inﬂ ation outlet on the

control unit.

7. Turn on the spa and press the button, aim the inﬂ ation hose at the

inlet/outlets on the spa tub and spa control unit to dry out any water in the

piping system

(see drawings 16 & 17).

8. Use a clean towel to wipe up any remaining water and moisture on the

spa tub and spa control unit.

9. Ensure the spa tub and spa control unit are thoroughly dried.

NOTE: The enclosed plugs (15) can be used to cover the water inlet and

outlet connectors from the inside of the spa tub to prevent water from

ﬂ owing out.

Spa Tub Cleaning

If dirt is visible in the water or water becomes cloudy and proper water

chemistry does not clear it up, change the water and clean the spa tub.

See “Spa Tub Drainage” section on how to drain the spa.

While empty, remove the cartridge housing from inside of the spa tub wall,

clean and/or replace the ﬁ lter cartridge. Use a sponge and mild soap solution

to wipe away any soil or stains on the inside of the spa wall. Rinse thoroughly

before reﬁ lling with clean water.

IMPORTANT: Do not use steel wool, hard brushes or abrasive cleaners.

Spa Tub Air Valve Fastening

Check the spa tub air valve for leakage and tightness before use. If air is leaking

from the air valve, use the provided wrench (22) to tighten the air valve as follow:

1. Make sure the spa tub is deﬂ ated, open the air valve cap and insert the

wrench

(22) into the air valve body (see drawing 18).

2. With one hand, hold the backside of the air valve base from the inside of

the spa tub wall and turn the wrench (22) clockwise.

IMPORTANT: Never adjust the air valve base when the spa is in use or

ﬁ lled with water. Only use the air valve wrench if the air valve is loose or

there is leakage around air valve base. Do not over tighten the air valve: over tightening can damage the

valve. Just ensure the air valve is snug and not leaking.

Spa Cover

The attachment buckles of the cover are locking buckles. Two keys are provided in the plastic bag with the manual

and other accessories. Each buckle is marked with “locked” and “unlocked” symbols for easy operation: put the

key into the slot on the buckle and turn it to the appropriate position to lock or unlock the buckle respectively.

To assure safety from unauthorized access, always put the cover on when spa is not in use and lock all buckles.

Always keep the keys out of reach of children. In case you misplace the keys, you can use any similar size ﬂ at

screwdriver to lock or unlock the buckles.

Inspect the spa cover regularly for leaks, premature wear and tear, damage, or signs of deterioration. Never use

a worn or damaged cover: it will not provide the level of protection required to prevent unsupervised access to the

spa by a child.

MAINTENANCE

Page 18

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Intex PureSpa - 28474 in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Intex PureSpa - 28474

Intex PureSpa - 28474 User Manual - German - 24 pages

Intex PureSpa - 28474 User Manual - Dutch - 22 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Intex PureSpa - 28474 Manual

Product: