Manual Intex Krystal Clear Ozon Saltwater Systeem ZS8220 (page 10 of 26) (English)

686092

Zoom out

Zoom in

1/26

(187IO) MODEL ZS8220 & ZS8230 OZONE & SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 08/01/2012

187A

SAVE THESE INSTRUCTIONS Page 10

English

SALT & POOL WATER VOLUMES

• Whichkindofsalttouse:

Use only Sodium Chloride Salts

Use only sodium chloride (NaCl) salt that is at least 99.8% pure. It is also

acceptable to use water conditioning salt pellets (the compressed forms of

evaporated salt). However, it will take a longer time for them to dissolve.

Do not use iodized or yellow (yellow prussiate of soda) colored salt.

Salt is added to the pool water and the electrolytic cell uses the salt to create

chlorine. The purer the salt the better the performance of the electrolytic cell.

• OptimumSaltLevels

The ideal salt level in the pool water is between 2500-3500 ppm (parts per million).

The optimal level is 3000 ppm.

A too low salt level will reduce the efficiency of the Ozone & Saltwater System and

result in low chlorine production. A high salt level may generate a salty taste to the

pool water (this may occur at a salt level above 3500-4000ppm). Too high a salt

level may damage the power supply and cause corrosion to the pool metal fixtures

and accessories. The Salt Table page of this manual, shows the correct dosage of

salt needed. The salt in the pool is constantly recycled. The loss of salt is due only

to pool water being physically removed from the pool. Salt is not lost due to

evaporation.

• AddingSalt

1. Switch the filter pump on to start the water circulation.

2. Keep the Ozone & Saltwater System turned off.

3. Determine the amount of salt to be added (see “Salt Table”).

4. Evenly spread the proper amount of salt around the inside perimeter of the

pool.

5. Avoid clogging the filter. Do not add salt through the skimmer.

6. Brush the pool bottom to speed up the dissolving process. Do not allow salt to

pile up on the bottom of the pool. Run the filter pump 24 consecutive hours to

thoroughly dissolve the salt.

7. After 24 hours and if all the salt is dissolved, turn on the Ozone & Saltwater

System, press button until you hear a “beep”, code “00” flashing and set the

saltwater pool system to desired operating time (see “Operating Time Table”).

• RemovingSalt

If too much salt has been added, the unit will beep and display “Code 92” (see “Alarm

Codes”). You will need to lower the salt concentration. The only way to do so, is to

partially drain the pool and refill it with fresh water. Drain and refill

approximately 20% of the pool’s water until the “Code 92” disappears.

• PoolVolumeCalculation

Rectangular

Length x Width x Average Depth x 7.5 Length x Width x Average Depth

Circular

Length x Width x Average Depth x 5.9 Length x Width x Average Depth x 0.79

Oval

Length x Width x Average Depth x 6.0 Length x Width x Average Depth x 0.80

Types of Pool Gallons

(pool size in feet)

Cubic Meters

(pool size in meters)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Intex Krystal Clear Ozon Saltwater Systeem ZS8220 in the language / languages: English as an attachment in your email.

The manual is 2,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Intex Krystal Clear Ozon Saltwater Systeem ZS8220

Intex Krystal Clear Ozon Saltwater Systeem ZS8220 User Manual - German - 23 pages

Intex Krystal Clear Ozon Saltwater Systeem ZS8220 User Manual - Dutch - 27 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Intex Krystal Clear Ozon Saltwater Systeem ZS8220 Manual

Product: