686151

Intex ECO7111 Manual

21
Zoom out
Zoom in
Previous page
1/29
Next page
249
PO
(249PO) MODEL ECO7111 Cartridge Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 05/25/2016
English
OWNER’S MANUAL
Cartridge Filter Pump &
Saltwater System with E.C.O.
(Electrocatalytic Oxidation)
Model ECO7111
IMPORTANT
SAFETY RULES
Read, understand, and follow
all instructions carefully before
installing and using this product.
IMPORTANT!
DO NOT RETURN PRODUCT TO STORE
To purchase parts and accessories or to obtain non-technical assistance, Visit
www.intexcorp.com
For technical assistance and missing parts call us toll-free (for U.S. and Canadian Residents):
1-800-234-6839
Monday through Friday, 8:30am to 5:00pm Pacific Time
Don’t forget to try these other fine Intex products: Pools, Pool
Accessories, Inflatable Pools and In-Home Toys, Airbeds and
Boats available at fine retailers or visit our website listed below.
Due to a policy of continuous product improvement, Intex
reserves the right to change specifications and appearance,
which may result in updates to the instruction manual without
notice.
249-*PO-R0-1705
For illustrative purposes only.
SAVE THESE INSTRUCTIONS
Page 2
(249PO) MODEL ECO7111 Cartridge Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 05/25/2016
English
249
PO
S AVE THESE INSTRUCTIONS
English
Page 2
Warnings
.........................................................................
3
Parts References
............................................................
4-5
Product Information & Specifications
..........................
6
Setup Instructions
..........................................................
7-10
Salt & Pool Water Volumes
............................................
11
Intex Pools Salt Table
.....................................................
12
Intex Pools Cyanuric Acid Table
...................................
13
Intex Pools Operating Time Table
.................................
14
Non-Intex Pools Salt Table
.............................................
15
Non-Intex Pools Cyanuric Acid Table
...........................
15
Non-Intex Pools Operating Time Table
.........................
15
Operating Instructions
...................................................
16-18
LED Code Chart
.............................................................
19
Maintenance
...................................................................
20-22
Long Term Storage
.........................................................
23
Pool Maintenance and Chemical Definitions
..............
24
Troubleshooting Guide
..................................................
25-27
General Aquatic Safety
..................................................
28
Limited Warranty
............................................................
29
TABLE OF CONTENTS
SAVE THESE INSTRUCTIONS
Page 2
(249PO) MODEL ECO7111 Cartridge Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 05/25/2016
English
249
PO
S AVE THESE INSTRUCTIONS
English
Page 3
This product is for use with storable pools only. Do not use with permanently-installed pools. A
storable pool is constructed so that it is capable of being readily disassembled for storage and
reassembled to its original integrity. A permanently-installed pool is constructed in or on the ground
or in a building such that it cannot be readily disassembled for storage.
To reduce the risk of electric shock the pool must be installed no closer than 6 feet (1.8 m) from any
electrical outlet. Do not place portable appliances closer than 5 feet (1.5 m) from the pool.
CAUTION
WARNING
These product warnings, instructions and safety rules provided with the product represent some common risks
of water recreation devices and do not cover all instances of risk and danger. Please use common sense and
good judgement when enjoying any water activity.
IMPORTANT SAFETY RULES
Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product.
READ AND FOLLOW ALL INSTRUCTIONS
•
To reduce the risk of injury, do not permit children to use this product. Always supervise children
and those with disabilities.
•
Children must stay away from this product and electrical cord(s).
•
Assembly and disassembly by adults only.
•
Risk of electric shock. Connect only to a grounding type receptacle, this product is provided with
a ground-fault circuit interrupter. If replacement of the plug or cord is needed, use only identical
replacement parts.
•
Always unplug this product from the electrical outlet before removing, cleaning, servicing or
making any adjustment to the product.
•Theunitisprovidedwithaground-faultcircuitinterrupter(GFCI).TotesttheGFCI,pushthetest
button. TheGFCIshouldinterruptpower.Push the reset button, power should be restored. If the
GFCIfailstooperateinthismanner.TheGFCIisdefective.IftheGFCIinterruptspowertothe
pump without the test button being pushed, a ground current is flowing, indicating the possibility
of an electric shock. Do not use this pump. Disconnect the pump and have the problem
corrected by a qualified service representative before using.
•
Do not bury the electrical cord. Locate the cord where it will not be damaged by lawn mowers,
hedge trimmers and other equipment.
•
To reduce the risk of electric shock, replace damaged cord immediately. Use a qualified
electrician to replace the cord.
•
To reduce the risk of electric shock, do not use extension cords, timers, plug adaptors or
converter plugs to connect unit to electric supply; provide a properly located outlet.
•
Do not attempt to plug in or unplug this product while standing in water or when your hands are
wet.
•
Donotuseanapplianceleakagecurrentinterrupter(ALCI)inplaceofaGFCIsincetheALCIwill
not protect people.
•Positionthisproductawayfromthepool,soastopreventchildrenfromclimbingonand
accessing the pool.
•
Do not operate this product when the pool is occupied.
•Neverusethepoolifindicatedchlorinelevelismorethan3ppm.
•Thisproductisintendedtobeusedonlyforthepurposesdescribedinthemanual!
•Operatingthisproductwithoutwaterflowingthroughthesystemcancauseabuildupof
flammablegaseswhichcanresultinFIREOREXPLOSION.
FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN PROPERTY
DAMAGE, ELECTRIC SHOCK, ENTANGLEMENT OR OTHER SERIOUS
INJURY OR DEATH.
SAVE THESE INSTRUCTIONS
Page 2
(249PO) MODEL ECO7111 Cartridge Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 05/25/2016
English
249
PO
S AVE THESE INSTRUCTIONS
English
Page 4
PARTS REFERENCE
Before assembling your product, please take a few minutes to check the contents and become familiar
with all the parts.
NOTE:
Drawingsforillustrationpurposeonly.Actualproductmayvary.Nottoscale.
Notoolsarerequiredfortheassembly.
1
2
3
4
6
5
8
8
7
1
2
10
9
34
13
14
15
12
16
17
30
35
18
11
12
31
33
*
If this pump was not purchased as part of a pool set, the above parts can
be ordered at www.intexcorp.com if needed.
Parts shown on this page are supplied with the pool package and are shown
here for assembly purposes only.
*
19
20
22
23
2421
19
20
21
22
23
36
25
*
37
SAVE THESE INSTRUCTIONS
Page 2
(249PO) MODEL ECO7111 Cartridge Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 05/25/2016
English
249
PO
S AVE THESE INSTRUCTIONS
English
Page 5
PARTS REFERENCE (continued)
Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts.
" * ": Optional.
When ordering parts, be sure to quote the model number and part numbers.
REF. NO.
DESCRIPTION QTY.
SPARE
PART NO.
SMALL AGP LARGE AGP
COMMON PARTS
1 AIRRELEASEVALVE/SEDIMENTRELEASEVALVE 2 10460
2 VALVEO-RING 2 10264
3 THREADEDFILTERHOUSINGCOLLAR 1 10749
4 FILTERHOUSINGCOVER 1 10750
5 FILTERHOUSINGO-RING 1 10325
6 FILTERCARTRIDGE(29000) 1
7 AIRRELEASEVALVEB(WITHO-RING) 1 10725
8 PUMPHOSEWITHNUTS 2 11009
9
WATERTRANSFERHOSE(WITHCOLLARAND2HOSECLAMPS)
1 11583
10 SCREW 2 11519
11 FLOWSENSOR 1 11460
12 ELECTROLYTICCELLNUT 2 11582
13 ELECTROLYTICCELL(O-RINGCINCLUDED) 1 11906
14 E.C.O
.
ELECTRODE 1 11900
15 L-SHAPEO-RING 1 11228
16 O-RINGC 1 10712
17 ANGLEJOINT(O-RINGDINCLUDED) 1 11584
18 O-RINGA 1 11587
19*
PLUNGERVALVE(HOSEO-RING&STEPWASHERINCLUDED)
2 10747
20* HOSEO-RING 2 10262
21* STEP WASHER 2 10745
22* STRAINERNUT 2 10256
23* FLATSTRAINERRUBBERWASHER 2 10255
24* THREADEDSTRAINERCONNECTOR 1 11235
25* ADJUSTABLEPOOLINLETJETNOZZLE 1 12369
26* ADAPTOR B 2 10722
27* STRAINERCONNECTOR 1 11070
28* POOLINLETJETNOZZLE 1 12364
29* STRAINERGRID 1 11072
30 CELL COVER 1 11131
31 TITANIUMELECTRODE 1 11899
32 TEST STRIPS 1 19635
33
TITANIUMELECTRODEO-RING 2 11585
34
CONTROLSTATION
1
11909
35
COLLARNUT
1
11604
36*
AIRJETVALVE 1 12363
37*
INLETTHREADEDAIRCONNECTOR 1 12371
38*
INLETSTRAINERCONNECTOR 1 12365
39*
POOLINLETAIRADAPTOR 1 12368
40*
AIRJETVALVECAP(NOTSHOWN)
1 12373
SAVE THESE INSTRUCTIONS
Page 2
(249PO) MODEL ECO7111 Cartridge Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 05/25/2016
English
249
PO
S AVE THESE INSTRUCTIONS
English
Page 6
This product is specially designed for above ground pools. It will destroy the bacteria, oxidize
bather organics and control algae, which provide a safe, clean and comfortable swimming pool.
Common salt (sodium chloride) is made up of two elements, sodium and chlorine. During the
installation of your Saltwater System/Filter Pump, a measured quantity of salt is dissolved in the
pool water to make it slightly salty. The pool water flows through the saltwater system’s
electrolytic cell to produce HCLO. The HCLO dissolves in the water and instantly starts
destroying bacteria and algae. It also oxidizes all other organic materials.
The Electrocatalytic Oxidation (E.C.O
.
) is an Advanced Oxidation Processes (AOPs). When
direct current is applied to the electrocatalytic oxidation electrodes, water will be discharged to
generate “hydroxyl radicals”. The hydroxyl radical is a powerful oxidant, which oxidizes organic
contaminants, and destroys bacteria and algae. Hydroxyl radicals in combination with free
available chlorine provide the strongest and safest pool water sanitation.
HOW SANITIZER IS GENERATED
Power: 110 - 120 Volt
Amperage: Saltwater System - 0.6 A; Filter Pump - 1.5 A
IdealSaltLevel: 3000ppm(partspermillion)
Maximum Sanitizer Output/hour: 5 grams/hour
E.C.O
.
Cell Output Current: 500 mA
Limited Warranty: see “Limited Warranty”
HOW THE ELECTROCATALYTIC OXIDATION WORKS
PRODUCT SPECIFICATIONS
Flow Sensor
E.C.O
.
ELECTRODE
Water Outlet
Electronic
Control Station
SAVE THESE INSTRUCTIONS
Page 2
(249PO) MODEL ECO7111 Cartridge Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 05/25/2016
English
249
PO
S AVE THESE INSTRUCTIONS
English
Page 7
STRAINER & PLUNGER VALVE SETUP
Strainer & Plunger Valve Setup (small AGP)
The strainer grid prevents large objects from jamming and/or damaging the filter pump.
The plunger valve assembly prevents water from flowing into the filter pump while the
filter cartridge is being placed or cleaned. If your pool has an inflatable top ring, install the
strainer, nozzle and plunger valve before inflating the pool liner top ring. The parts
numbers here onward, refer to the parts depicted in the Parts List section of this manual.
To install, do the following:
IMPORTANT
The Saltwater System/Filter Pump must be installed as the last piece of pool equipment
in the water return line to the pool. This location extends the life of the titanium plates.
Please visit
www.intexcorp.com
for the latest instructional video on the
installation and operation of this product.
19
20
21
26
(Adaptor B)
38
28
19
20
21
26
(Adaptor B)
27
29
36
39
SAVE THESE INSTRUCTIONS
Page 2
(249PO) MODEL ECO7111 Cartridge Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 05/25/2016
English
249
PO
S AVE THESE INSTRUCTIONS
English
Page 8
The strainer grid prevents large objects from jamming and/or damaging the filter pump. If
your pool has an inflatable top ring, install the strainer, nozzle and plunger valve before
inflating the pool liner top ring. The part numbers here onward refer to the parts depicted in
the Parts List section of this manual. To install, do the following:
POOL OUTLET - STRAINER & PLUNGER VALVE SETUP (OPTIONAL)
1.
In a counter-clockwise motion unscrew plunger valve union
from the threaded strainer connector
(24)
(see drawing 1).
Be careful not to lose the step rubber washer
(21)
. Place the
plunger valve on the ground in a safe place.
2.
In a counter-clockwise motion unscrew the strainer nut
(22)
from the threaded connector
(24).
Leave the flat washer
(23)
on the connector
(24)
.
3.
Install the strainer and plunger valve at the lower position of
pool outlet (marked "+").
From the inside of the pool liner
insert the connector
(24)
into one of the pre-cut holes with
the washer remaining on the connector to be placed against
the inside of the liner wall.
4.
Before assembly, lubricate the threads with a petroleum
jelly. Then, with the flat side of the strainer nut
(22)
facing
the outside wall of the liner in a clockwise motion screw the
strainer nut
(22)
back onto the threaded connector
(24)
(see drawing 2)
.
5.
Finger tighten the strainer nut
(22)
onto the threaded
connector
(24)
.
6.
Grasptheplungervalveassembly.Makesurethestep
washer
(21)
is in place.
7.
In a clockwise motion screw the plunger valve union
back
onto the threaded connector
(24) (see drawing 3)
.
8.
In a clockwise motion turn the plunger valve handle to close
position. Ensure the plunger valve is securely closed.
This will prevent water from flowing out during filling of
the pool
(see drawing 4)
.
2
23
24
INSIDE
LINER WALL
22
1
2
1
3
1
2
4
INSIDE
LINER WALL
SAVE THESE INSTRUCTIONS
Page 2
(249PO) MODEL ECO7111 Cartridge Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 05/25/2016
English
249
PO
S AVE THESE INSTRUCTIONS
English
Page 9
POOL INLET - NOZZLE & PLUNGER VALVE SETUP (OPTIONAL)
5
2
1
7
1
2
8
INSIDE
LINER WALL
9
WATER
FLOW
POOL
6
23
37
25
INSIDE LINER
WALL
22
36
1.
In a counter-clockwise motion unscrew plunger valve
union from the inlet threaded air connector
(37)
(see drawing 5)
Be careful not to lose the step
rubber washer
(21)
. Place the plunger valve on the
ground in a safe place.
2.
In a counter-clockwise motion unscrew the strainer
nut
(22)
from the inlet threaded air connector
(37).
Leave the flat washer
(23)
on the connector
(37)
.
3.
Install the nozzle and plunger valve at the upper
position of pool inlet.
From the inside of the pool
liner insert the nozzle union
(25 & 37)
into one of
the pre-cut holes with the washer remaining on the
connector to be placed against the inside of the liner
wall.
4.
Before assembly, lubricate the threads with a
petroleum jelly. Then, with the flat side of the
strainer nut
(22)
facing the outside wall of the liner
in a clockwise motion screw the strainer nut
(22)
back onto the inlet threaded air connector
(37)
(see drawing 6)
.
5.
Finger tighten the adjustable pool inlet jet nozzle
(25)
and the strainer nut
(22)
onto the inlet threaded air
connector
(37)
.
6.
Grasptheplungervalveassembly.Makesurethe
step washer
(21)
is in place.
7.
Screw the air jet valve
(36)
over the inlet threaded air
connector
(37).
NOTE:
Make sure the air jet valve
is securely tighten and facing up. In a clockwise
motion screw the plunger valve union
back onto the
inlet threaded air connector
(37) (see drawing 7)
.
8.
In a clockwise motion turn the plunger valve handle
to close position. Ensure the plunger valve is
securely closed. This will prevent water from flowing
out during filling of the pool
(see drawing 8)
.
9.
Adjust the direction of the nozzle head pointing
away from the pool outlet for a better circulation
result
(see drawing 9)
.
10.
The pool liner is now ready to be filled with water.
Consult the above-ground-pool owner’s manual for
the filling instructions.
SAVE THESE INSTRUCTIONS
Page 2
(249PO) MODEL ECO7111 Cartridge Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 05/25/2016
English
249
PO
S AVE THESE INSTRUCTIONS
English
Page 11
SALT & POOL WATER VOLUMES
• Whichkindofsalttouse:
Use only Sodium Chloride Salts
Useonlysodiumchloride(NaCl)saltthatisatleast99.8%pure.Itisalsoacceptabletouse
water conditioning salt pellets (the compressed forms of evaporated salt). However, it will take
a longer time for them to dissolve.
Do not use iodized or yellow (yellow prussiate of soda)
colored salt.
Salt is added to the pool water and the electrolytic cell uses this salt to create the
sanitizer. The purer the salt the better the performance of the electrolytic cell.
• OptimumSaltLevels
Theidealsaltlevelinthepoolwaterisbetween2500-3500ppm(partspermillion).Theoptimal
levelis3000ppm.
A too low salt level will reduce the efficiency of the saltwater system and result in low sanitizer
production. A high salt level may generate a salty taste to the pool water (this may occur at a salt
levelabove3500-4000ppm).Toohighofasaltlevelmaydamagethepowersupplyandcause
corrosion to pool metal fixtures and accessories. The Salt Table page of this manual, shows the
correct dosage of salt needed. The salt in the pool is constantly recycled. Salt loss occurs only
when pool water is physically removed from the pool. Salt is not lost due to evaporation.
• AddingSalt
1.
Switch on the unit, then press and hold both and button for 5 seconds, the LED
flashes “FP”. The unit is now in a Filter pump working mode and switch the filter pump on to
start the water circulation.
2.
Keep the saltwater system turned off.
3.
Determine the amount of salt to be added (see “Salt Table”).
4.
Evenly spread the proper amount of salt around the inside perimeter of the pool.
5.
Avoid clogging the filter by not adding salt through the skimmer.
6.
Brush the pool bottom to speed up the dissolving process. Do not allow salt to pile up on the
bottom of the pool. Run the filter pump 24 consecutive hours to thoroughly dissolve the salt.
7.
After 24 hours and if all the salt is dissolved, turn on the Saltwater System, press button
until you hear a “beep”, code “00” flashing (see “System Operation” section steps 2 to 4) and
set the saltwater system to desired operating time (see “Operating Time Table”).
• RemovingSalt
If too much salt has been added, the unit will beep and display “code 92” (see “Alarm Codes”).
You will need to lower the salt concentration. The only way to do so, is to partially drain the pool
andrefillitwithfreshwater.Drainandrefillapproximately20%ofthepool’swateruntilthe“Code
92” disappears.
• PoolVolumeCalculation
Rectangular
Length x Width x Average Depth x 7.5 Length x Width x Average Depth
Circular
Length x Width x Average Depth x 5.9 Length x Width x Average Depth x 0.79
Oval
Length x Width x Average Depth x 6.0 Length x Width x Average Depth x 0.80
Types of Pool
Gallons
(pool size in feet)
Cubic Meters
(pool size in meters)
SAVE THESE INSTRUCTIONS
Page 2
(249PO) MODEL ECO7111 Cartridge Filter Pump & Saltwater System with E.C.O. ENGLISH 7.5” X 10.3” PANTONE 295U 05/25/2016
English
249
PO
S AVE THESE INSTRUCTIONS
English
Page 21
MAINTENANCE (continued)
1
. Switch off the unit, unplug the power cord from the electrical socket.
2
. Turn both plunger valve handles fully clockwise until they stop. This closes the valve,
prevents the water from flowing out of the pool.
3
. Disconnect the hose with nut
(8)
from the Saltwater System, and assemble the cell cover
(30)
at the side of the cell.
4.
Unscrew the collar of the E.C.O
.
electrode
(14)
and pull out the E.C.O
.
electrode from the
electrolytic cell
(13)
housing.
5.
Pour kitchen grade vinegar into the electrolytic cell
(13)
to immerse the titanium and E.C.O
.
electrodes. Soak for 1 hour.
6.
Open one side of the cell cover
(30)
, drain and properly dispose of the vinegar. Connect the
hose which goes from the pool to the cell. Flush the electrolytic cell housing with the pool
water.
7.
Reversesteps3,4,5and6toreconnecttheelectrolyticcell.
30
8
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intex ECO7111 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intex ECO7111 in the language / languages: English as an attachment in your email.

The manual is 5,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info