588196
17
Zoom out
Zoom in
Previous page
1/28
Next page
260
GS
SAVE THESE INSTRUCTIONS
English
(260GS) MODEL ECO 8220G/8230G & 7220G/7230G SALTWATER SYSTEM ENGLISH 7.5” X 10.3” PANTONE 295U 06/29/2016
Page 17
OPERATION INSTRUCTIONS
1. Turn on the filter pump.
2
.
Start up the unit:
Plug the power cord into the electrical
outlet and test the RCD (circuit breaker).
Switch on the unit. Flashing code “00”
appears on the electronic control station’s
LED, indicating that the unit is ready to be
programmed.
3. Set operating hours for Saltwater system:
With code “00” flashing, press button to set the
desired operating hours. See the “Operating Time
Table” for the required operating hours related to each
pool size. Pressing will increase the time from 01
to 12 hours maximum. If you have selected too many
hours keep pressing to repeat the cycle.The built-in
timer will now activate your Saltwater System, at the
same time each day, for the number of hours you have set.
NOTE:
The Saltwater System will not operate if the filter pump is not operating. Make sure to
program your filter pump (or start it manually) for operation beginning 5 minutes before the
saltwater system and finishing 15 minutes after the saltwater system.
4
.
Lock keypad controls:
With the desired hour value showing, press button until you hear a
“beep”. A green “WORKING” indicator on the control panel will light up
within a few seconds to indicate that the saltwater system has started
chlorine production. Locking the control buttons into this setting prevents
unauthorized changing of the operating cycle.
NOTE:
If you forget to lock the keypad controls, the system will
automatically lock it and start working 1 minute later.
5.
Readjust operating time if necessary:
The operating hours can be re-adjusted if necessary. Press button
until you hear a “beep” to unlock the keypad and the current programmed
time will flash. Repeat steps 3 to 4.
(1 to 12 hours max per cycle)
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intex ECO 8230G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intex ECO 8230G in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Intex ECO 8230G

Intex ECO 8230G User Manual - German - 28 pages

Intex ECO 8230G User Manual - Dutch - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info