752504
11
Zoom out
Zoom in
Previous page
1/38
Next page
164A
SAVE THESE INSTRUCTIONS Page 11
(164) MODEL CS15220 SAND FILTER PUMP & FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 08/09/2011
English
PRODUCT SPECS & SETUP INSTRUCTIONS
PRODUCT SPECIFICATIONS
SETUP INSTRUCTIONS
Power: 220-240 Volt AC
Wattage: 470 W
Ideal Salt Level: 3000 ppm (parts per million)
Maximum Sanitizer Output/hour: 10 grams/hour
Copper Ionizer Output Current: 175mA
Maximum working pressure: 2.4 bar (35 psi)
Effective filtering area: 0.1 m2(1.1 ft2)
Maximum Flow Rate: 6050 liters/hour (1600 gallons/hour)
Recommended filtering media:
No. 20 silica sand or glass sand. Particle size
(Not included) range 0.45 to 0.85 mm (0.018 to 0.033 inches).
Uniformity Coefficient less than 1.75.
Recommended filtering media quantity:
No. 20 silica sand
25 Kg (55 Lbs)
or glass sand
18 Kg (40 Lbs).
Limited Warranty: see “Limited Warranty”
The sand filter removes suspended particles and sanitize your pool. Pool
chemistry is a specialized area and you should consult your local pool
service specialist for details.
TOOLS REQUIRED: One (1) Phillips screwdriver
Pump location and mounting:
The system must be installed on a solid level and vibration-free base.
Provide a location protected from the weather, moisture, flooding and
freezing temperature.
Provide adequate access, space and lighting for routine maintenance.
Pump motor requires free circulation of air for cooling. Do not install
the pump in a damp or non-ventilated location.
A team of 2 or more people is recommended for setting up this product.
Motor pre-filtering assembly setup:
1. Remove the sand filter and its accessories
from the packaging carefully and inspect for
any visible damage. If parts are damaged
contact your local service center listed at the
back of this ownerʼs manual.
2. In a counter-clockwise motion unscrew the leaf
trap cover (14) from the pre-filter housing. Take
out the basket (16) and filter housing nut (17)
(see drawing 10).
3.
Connect the pre-filter housing to the motor
water inlet. Note: Align the connector in the
pre-filter housing with the water inlet on the
motor (see drawing 11).
10
11
14
17
16
41
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intex CS15220 Krystal Clear at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intex CS15220 Krystal Clear in the language / languages: English as an attachment in your email.

The manual is 6,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Intex CS15220 Krystal Clear

Intex CS15220 Krystal Clear User Manual - German - 39 pages

Intex CS15220 Krystal Clear User Manual - Dutch - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info