587285

Intex 8110 Krystal Clear de luxe Manual

26
Zoom out
Zoom in
Previous page
1/31
Next page
101
SAVE THESE INSTRUCTIONS
Page 26
(101) MODEL 8110 KRYSTAL CLEAR™ DELUXE SALTWATER SYSTEM (SALT IN POOL) ENGLISH 7.5” X 10.3” PANTONE 295U 08/07/2008
English
TTRROOUUBBLLEESSHHOOOOTTIINNGG GGUUIIDDEE
TROUBLESHOOTING GUIDE (continued)
1. Circulation line is blocked.
2. Incorrect inlet and outlet hose
direction.
3. Flow sensor conduit incorrectly
installed.
4. Scale on the flow sensor.
5. Flow sensor cord is loose.
6. Flow sensor failure.
1. Dirt or scale on titanium plates.
2. Low salt level / No salt.
3. Electrolytic cell cord is loose.
4. Possible electrolytic cell failure.
1. High salt level.
• Ensure the plunger valves are opened
(if any).
• Ensure your filter cartridge, cell are
clear from debris and dirt. See
“Maintenance”.
• Release all trapped air in the circulation
line. See Filter Pump Manual.
• Check for the direction of water inlet
and water outlet hose. Reverse the
hoses if necessary. See “Set Up
Instructions”.
•
Check for the arrow on the follow sensor
conduit toward the same direction with
the one on the cell. Reverse the follow
sensor conduit if necessary.
• Ensure the flow sensor (especially the
hinge) is clean. See “Maintenance”.
• Check for flow sensor loose or not
connected properly. Plug the flow
sensor firmly into the flow sensor
receptacle.
• Contact Intex Service Center for
replacement.
• Remove the electrolytic cell for
inspection and clean it if necessary.
See “Maintenance”.
• Add salt. See “Salt & Pool Water
Volumes”.
• Check to see if cell cord is loose or not
connected properly. Ensure the cell
cord is plugged firmly into the cell
housing receptacle.
• Contact Intex Service Center. Replace
the cell if needed.
• Partially drain the pool and refill with
fresh water. See “Salt & Pool Water
Volumes”.
• Contact Intex Service Center.
LED PANEL
CODE
PROBLEM
REMED
LED Panel Code Flash & Alarm On (NOTE: Always turn off the power before cleaning and servicing).
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Intex 8110 Krystal Clear de luxe at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Intex 8110 Krystal Clear de luxe in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info