Manual Intex 28405 Pure Spa Plus SSP-H-10-2 (page 9 of 22) (English)

686124

Zoom out

Zoom in

1/22

254

S AVE THESE INSTRUCTIONS

(254PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 08/31/2018

English

Page 9

SET UP

(continued)

Press the button to turn on the control unit panel buttons ﬁ rst.

Press the button to inﬂ ate the spa tub wall for 8 to 10 minutes

until it is ﬁ rm to the touch but not hard

(see drawing 6)

IMPORTANT:

Do not over inﬂ ate or use high pressure air

compressor to inﬂ ate.

Press the button again to turn it off.

Replace the air valve cap back.

NOTE:

The cap is designed to be screwed on and off. Never exert

force as this could cause the complete internal inﬂ ation system of the

valve to come loose. See “Spa Tub Air Valve Fastening” for valve

maintenance.

Inﬂ ate the Spa Cover Air Bladder

Open the inﬂ ation valve and insert the inﬂ ation hose

(7)

into the

valve; press to inﬂ ate until it is ﬁ rm to the touch but not hard

(see drawing 7)

Disconnect the inﬂ ation hose

(7)

from the air blower inﬂ ation outlet

and the valve.

Replace the control base inﬂ ation cap

(5)

back; close and recess the

inﬂ ation valve.

NOTE:

If there is a need to add some air to the spa tub wall or spa cover

air bladder after they have been setup, refer to above “Inﬂ ate the Spa Tub Wall” and “Inﬂ ate the Spa Cover

Air Bladder” sections. The cover air bladder is preinstalled inside the spa cover. If it needs to be reinstalled,

place the uninﬂ ated air bladder inside the spa cover lip before inﬂ ating the bladder.

Deﬂ ation

For Spa Tub Wall:

Unscrew the cap to reveal the stem, push the stem in and turn 90

degree right to secure it in the down position

(see drawing 8)

Once the deﬂ ation is completed, push the stem in and turn 90 degree

left to return it to the inﬂ ation position.

Replace the cap back.

For Cover Air Bladder:

Pull valve cap out and squeeze the valve at its base until deﬂ ated.

Close and recess the valve back.

Press the button located on top of the control base

and remove the back cover

(see drawing 3)

Unscrew the control base inﬂ ation cap

(5)

to reveal the air blower inﬂ ation outlet, insert one end of the

inﬂ ation hose

(7)

into the outlet and turn to the right to lock it

(see drawing 4)

Unscrew the air valve cap to reveal the stem in the up position for inﬂ ation. Insert the other end of the

inﬂ ation hose

(7)

into the valve and turn to the right to lock it in position

(see drawing 5)

Press

1 2

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Intex 28405 Pure Spa Plus SSP-H-10-2 in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Intex 28405 Pure Spa Plus SSP-H-10-2 Manual

Product: