616630
7
Zoom out
Zoom in
Previous page
1/12
Next page
ENGLISH - 13 ENGLISH - 14
4.4 Intercom communicaon between four units (from “INTERCOM” menu)
To start an intercom communicaon between your F5MC (unit nr1 Pic. 7) and other three
units (units nr2,3 and 4 Pic. 7) follow these steps:
1. Pair units nr1 with nr2 (Pic.7)
2. Pair units nr1 with nr3 (Pic.7)
3. Pair units nr4 with nr3 (Pic.7)
Chapters 4.1.1/4.1.2/4.1.3 for more details
on pairing Interphone MC / Interphone
previous range / non Interphone devices.
Pairing procedure is necessary only once.
4. Follow the chart shown in Pic.8 to start intercom conference.
5. When connecon has been started the vocal guidance will prompt a message for
intercom acvaon, BLUE (6) led of F5MC units will light up.
6. To stop the intercom conference press twice MFB (1) buon on unit nr1 (Pic.7): the
rst press will disconnect unit nr1 from unit nr2, the second press will disconnect
nr1 from unit nr3. Press then MFB (1) buon on unit nr4 (Pic.7) to disconnect unit
nr3 from unit nr4. All units will go in Standby mode.
1 4
2 3
1. Push MFB (1) once to connect
units 1+2+3 (Pic.7) in conference
mode.
2. Push MFB (1) once on unit nr4
(Pic.7) to connect unit nr4 to
other units 1+2+3 in conference
mode.
Pic.7 Pic.8
4.5 Intercom auto-reconnecon
When your F5MC unit is over the communicaon range, connecon hangs. F5MC
will try to recover the connecon for 30 minutes. Within this me interval, if F5MC
unit will come again into communicaon range, connecon will be automacally
resumed.
During reconnecon aempts, a double-beep will be generated, as a reminder that
unit is aempng to reconnect.
Aer 30 minutes, if reconnecon fails, F5MC will go in Standby mode, stopping
reconnecon aempt.
If you need to stop reconnecon aempt, press MFB (1) buon on your F5MC unit.
Aenon: during intercom acvaon in your F5MC unit, will be prompted
the message “intercom connecon failed” and aer “Intercom acve,
press center buon to disconnect” . This is ok, because only one intercom
channel has been acvated.
4.3 Intercom communicaon between three units (from “INTERCOM” menu)
To start an intercom communicaon between your F5MC (unit nr1 Pic. 5) and other two
units (units nr2 and 3 Pic. 5) follow these steps:
1. Pair units nr1 with nr2 (Pic.5)
2. Pair units nr1 with nr3 (Pic.5)
Chapters 4.1.1/4.1.2/4.1.3 for more details
on pairing Interphone MC / Interphone
previous range / non Interphone devices.
Pairing procedure is necessary only once.
3. Follow the chart shown in Pic.6 to start intercom conference.
4. When connecon has been started the vocal guidance will prompt a message for
intercom acvaon, BLUE (6) led of F5MC units will lights up.
5. To stop the intercom conference press twice MFB (1) buon on unit nr1 (Pic.5): the
rst press will disconnect unit nr1 from units nr2, the second press will disconnect
nr1 from unit nr3. All units will go in Standby mode.
1
2 3
Push UP (2) unl the beep to connect ONLY
units nr1+nr3 (Pic.5).
Push DOWN (3) unl the beep to connect
ONLY units nr1+nr2 (Pic.5).
Push MFB (1) once to connect all units
1+2+3 (Pic.5) in conference mode.
Pic.5 Pic.6
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Interphone-Cellularline F5MC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Interphone-Cellularline F5MC in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Interphone-Cellularline F5MC

Interphone-Cellularline F5MC User Manual - German - 12 pages

Interphone-Cellularline F5MC Quick start guide - Dutch - 2 pages

Interphone-Cellularline F5MC User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info