522363

Interphase CHART MASTER V6 Manual

45
Zoom out
Zoom in
Previous page
1/89
Next page
47
User Manual
♦ Sleeping Target
Target located outside the Activation Range. Sleeping Target is represented
by a small oriented triangle.
♦ Lost Target
When the AIS info is not received from that vessel for 3.5 minutes. The
presentation will be a flashing black triangle with a cross through.
♦ Activation Range
Range around your boat where Targets become active. AIS Target become active
within this range. Activation Range should be greater than CPA Limit by definition.
NOTE A Target is removed from the screen if data is not received for 10 minutes.
The maximum number of tracked Targets is 100.
Depending on the scale the presentation of the Targets change to remove
clutter on the screen.
This information is updated every 3 seconds to 6 minutes depending on speed
and rate of turn, enabling the track of the vessels in range to be plotted.
4.8.2 AIS Menu
To configure the chart plotter to receive AIS data, follow the procedure:
[MENU] + "SETUP" + [ENTER] + "AIS" + [ENTER]
Display : Turns ON or OFF the display of AIS targets overlay on the cartography.
Activation Range : Defines the range from the fix within which the AIS Target becomes active. The
values allowed are from 0.1 to 20 Nm.
CPA Alarm : Turns ON or OFF the alarm.
CPA Limit : The values allowed are from 0.1 to 10 Nm.
TCPA Alarm : Turns ON or OFF the alarm.
TCPA Limit : The values allowed are from 1 to 30 min.
4.8.3 To set the chart plotter for receiving AIS
Make sure that the AIS receiver is properly connected to the chart plotter.
The chart plotter reads the AIS NMEA message VMD, type 1, 2, 3 and 5.
Select the used serial port and transmission speed by following the procedure:
[MENU] + "SETUP" + [ENTER] + "Input/Output" + [ENTER] + "Port n In-
put" + [ENTER] + "m" + [ENTER]
Where: n = Port 1/Port 2/Port 3 (CM 11CV+/11CVS+: ports 4/5 too)
m = NMEA-0183 4800-N81-N
AIS 38400
according to the transmission speed of your AIS receiver.
4.8.4 Quick Info on AIS Target
By placing the cursor over a AIS Target icon, the following information is displayed:
♦ Vessel Name
♦ MMSI number
♦ Radio Call Sign
♦ SOG
♦ COG
♦ CPA and TCPA values
NOTE The selected AIS Target icon is surrounded by a square frame when user
places the cursor over the icon.
4.9 C-MAP WEATHER SERVICE
It is an innovative meteorological forecasting system with the ability to visualize
the weather forecast, overlaying it on cartography. The weather data is held on
C-MAP’s weather server, which can be accessed via a C-COM modem connected to
the chart plotter or by using the C-MAP personal Suite (or the DPS - Dealer Pro-
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Interphase CHART MASTER V6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Interphase CHART MASTER V6 in the language / languages: English as an attachment in your email.

The manual is 5,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info