522363
22
Zoom out
Zoom in
Previous page
1/89
Next page
24 User Manual
[MENU] + "MENU" + [ENTER] +"ROUTE" + [ENTER] + "REPORT" + [ENTER]
+ [L
OCATE]
The Route Report page is closed and the chart is centered over the first Waypoint
of the selected Route.
Sending Route
To transmit the Active Route information onto the NMEA output port.
[MENU] + "MENU" + [ENTER] +"ROUTE" + [ENTER] + "SEND" + [ENTER]
The NMEA WPL & RTE messages are sent to the output port.
Receiving Route
To save Route information received from the NMEA input port.
[MENU] + "MENU" + [ENTER] +"ROUTE" + [ENTER] + "RECEIVE" + [ENTER]
The received route is saved on the Active route, overwriting it. The NMEA WPL &
RTE messages are sent to the input port.
3.3 GOTO FUNCTION
This functions allows you to place the destination point and immediately start
navigating to it.
Goto Cursor
Place the cursor on the desired location + [GOTO] + "CURSOR" + [ENTER]
The destination is placed at the cursor position and you are now navigating to it.
It is a temporary User Point that will be removed when the navigation is stopped.
If the fix is received, the destination is placed on the desired location, otherwise
a warning message is shown. If the destination is already placed, it is possible to
remove the existing destination and place a new one on the cursor position.
Goto Mark on the Chart page
Place the cursor on any existing Mark + [GOTO]
Goto Mark using the User Points List
[GOTO] + "MARK" + [ENTER] + select the desired User Point + [GOTO]
Goto Route using the Select Route menu
[GOTO] + "ROUTE" + [ENTER] + select one of the existing Routes + [ENTER]/
[GOTO]
The destination is placed on the first Waypoint of the selected route and then the
Route Following function is activated.
Stopping Navigation
If the destination has been placed, to remove it:
[GOTO] + [DELETE]
otherwise, to remove the current destination and place a new one at cursor position:
Place the cursor on location to navigate to + [GOTO] + [NEW] + [ENTER]
3.4 USING TRACK
A very useful feature of the chart plotter, is the ability to store and display exactly
where the boat has been. This feature, referred to as Tracking, can provide in-
valuable information about the effect of tide and wind influence on the boat's
progress as well as giving an indication of the helmsman's performance.
When this limit has been reached, the oldest points are deleted and overwritten
by the newest ones.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Interphase CHART MASTER V6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Interphase CHART MASTER V6 in the language / languages: English as an attachment in your email.

The manual is 5,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info